Search found 104 matches
- Thu Oct 24, 2013 6:36 am
- Forum: Materials, Sources, and Innovations
- Topic: Mast Cart
- Replies: 1
- Views: 2980
Re: Mast Cart
I don't have pictures, but some inflatable wheel barrow tires and wheels from Northern tools or Home depot,(smaller wheels make it harder to move) some of that scrap metal of yours to make a 2' by 3' rectangle cart type fixture and a couple of bolts to fit the wheels as axles . Some old carpet to pa...
- Sat Oct 05, 2013 3:45 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Pearson Ensign Restoration
- Replies: 47
- Views: 24522
Re: Pearson Ensign Restoration
What happened to the Ensign??
- Tue Sep 10, 2013 9:51 am
- Forum: Pearson Triton Specifics
- Topic: Triton hard dodger
- Replies: 0
- Views: 7436
Triton hard dodger
Here's a nice dodger photo. Dare I say this boat is for sale,
1974 Pearson 28 Triton in Seattle WA
1974 Pearson 28 Triton in Seattle WA
- Sat Aug 10, 2013 10:45 pm
- Forum: Questions and Answers
- Topic: Engine panel lexan cover
- Replies: 2
- Views: 1947
Re: Engine panel lexan cover
Will it be a flat panel type of Lexan cover? If so go to any glass shop with the dimensions and they can cut one for you. Or have a few made, they don't look very clear forever. Or try Home depot, Lowes, etc,
- Mon Jul 01, 2013 9:20 pm
- Forum: Questions and Answers
- Topic: New Chainplates
- Replies: 8
- Views: 4150
Re: New Chainplates
The real problem with SS chainplates is where they pass through the deck, this is where corrosion sets in. They work well for external chainplates though. I would stick with Silicone Bronze when replacing. HEY!! What do I know???I'm just a kid!!!
- Mon Jun 10, 2013 5:15 pm
- Forum: Questions and Answers
- Topic: What is this for??
- Replies: 5
- Views: 2806
Re: What is this for??
It's a storage mount for the outboard when you leave the boat and don't want it stolen, look around and you'll find a pan to catch the dripped fluids. either that or it's a WALNUT CRACKER!!!!
- Sun May 26, 2013 1:28 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Packing/Stuffing Box Hose
- Replies: 3
- Views: 2696
Re: Packing/Stuffing Box Hose
Go to a reputable hose vender such as a place that makes up hydraulic hose,( check the yellow pages or on line) they will have the correct size you need. What you need is called: Suction Hose. You can use different hose but this type is easy to work with and very durable.
- Wed May 22, 2013 12:04 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Soft Sole Replacement
- Replies: 26
- Views: 9073
- Tue May 21, 2013 5:41 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Soft Sole Replacement
- Replies: 26
- Views: 9073
Re: Soft Sole Replacement
NICE, I just noticed you're in WI, just coming into the sailing season , good for you, I'm curious, are you launching and retrieving off the trailer? If so it may be helpful if you fabbbed up a keel guide to help center the keel when floating on the trailer cuz the water may be a little cold when it...
- Sat May 18, 2013 3:25 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Soft Sole Replacement
- Replies: 26
- Views: 9073
Re: Soft Sole Replacement
Nice work , you got a nice texture on the "grip" also.
- Mon May 06, 2013 11:35 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Soft Sole Replacement
- Replies: 26
- Views: 9073
Re: Soft Sole Replacement
Sounds like a perfect place for KIWI-GRIP to me!!
- Sun May 05, 2013 9:22 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Soft Sole Replacement
- Replies: 26
- Views: 9073
Re: Soft Sole Replacement
Given any thoughts to taping the joints for added strength and protection? Nice repair work, better than average core fitting.
- Fri May 03, 2013 10:24 pm
- Forum: Questions and Answers
- Topic: Filling Old Transducer Hole
- Replies: 18
- Views: 5913
Re: Filling Old Transducer Hole
Nice work John, I all for going back with cloth for the layup and not just gooping some filler in to level out the patch. Smooth and paint and permanent patch complete.
- Wed Apr 24, 2013 3:58 pm
- Forum: Questions and Answers
- Topic: Filling Old Transducer Hole
- Replies: 18
- Views: 5913
Re: Filling Old Transducer Hole
OK John, GOOD LUCK!!!
- Fri Mar 29, 2013 12:19 am
- Forum: Questions and Answers
- Topic: Filling Old Transducer Hole
- Replies: 18
- Views: 5913
Re: Filling Old Transducer Hole
You'll do fine John, Do you know if you're using nonblushing Epoxy? If not you'll have an extra step between each lay-up ( not each layer but each series of patches you install after setup or curing has taken place) It will have to be carefully cleaned to remove amine blush, double check with manufa...
- Thu Mar 28, 2013 12:51 am
- Forum: Questions and Answers
- Topic: Loose Lower Rudder
- Replies: 8
- Views: 2834
Re: Loose Lower Rudder
I use a shop vac when sanding or grinding, it really knocks down the dust. On my random orbital, I remove the dust collector and put the shop vac hose right into the exhaust , no dust.
- Thu Mar 28, 2013 12:38 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Removing a wheel and reinstalling a tiller
- Replies: 14
- Views: 6793
Re: Removing a wheel and reinstalling a tiller
It's actually called a Woodruf Key. Tell me what you are comfortable spending for the parts you need and I'll check for you at the salvage yard I use , If he has something that will work I'll grab it and tell you how much of your money I spent!! LOL... I'm going there on the 6th of next month. Doubl...
- Thu Mar 28, 2013 12:24 am
- Forum: Questions and Answers
- Topic: Filling Old Transducer Hole
- Replies: 18
- Views: 5913
Re: Filling Old Transducer Hole
John , If you're asking all these questions, I wouldn't worry about getting it (thickness) exactly right the first go. I have a question for you. Are you able to get to the back side of the area you're working? If so you can put a single layer patch on the back side and let it set up before trying t...
- Sat Mar 23, 2013 2:58 pm
- Forum: Questions and Answers
- Topic: Does epoxy resin go bad in the can?
- Replies: 5
- Views: 2334
Re: Does epoxy resin go bad in the can?
That old of Epoxy is nothing I would use, but that is only my opinion, That stuff ain't that expensive, if it something you're doing where failure is no big deal it's worth a try, beats throwing it away. But if you're trying to keep water out, or the rig up I wouldn't risk it. There are many differe...
- Tue Mar 19, 2013 3:00 am
- Forum: Classic Sailboats
- Topic: Anyone know the make/model of this boat?
- Replies: 6
- Views: 4692
Re: Anyone know the make/model of this boat?
Isn't that a Pearson 44ft contessa??
- Fri Nov 09, 2012 3:59 pm
- Forum: Ramblings
- Topic: The boat you want to sail Vs. the boat you want to restore
- Replies: 6
- Views: 3562
Re: The boat you want to sail Vs. the boat you want to resto
AHhh, the lessons learned the hard way!
- Tue Oct 23, 2012 2:46 pm
- Forum: Projects
- Topic: Pearson Triton-Bluewater on a budget
- Replies: 45
- Views: 18318
Re: Pearson Triton-Bluewater on a budget
Thought you giving the boat away? or donating it?
- Sun Oct 21, 2012 8:59 pm
- Forum: Questions and Answers
- Topic: Calculating Forces on Anchor Rode
- Replies: 4
- Views: 2052
Re: Calculating Forces on Anchor Rode
I would always choose on oversizing the components since you are never guaranteed the conditions or the availability of replacements when you have a failure. but that's just me... you know belt and suspenders!!!! 1/8th the displacement.... I don't think he understood the USCG on that
- Fri Oct 05, 2012 7:52 pm
- Forum: Questions and Answers
- Topic: Diesel oil recommendations
- Replies: 7
- Views: 2720
Re: Diesel oil recommendations
For oil recommendations check in the engine manual. In 35 years of running diesels I have never used Shell Rotella oil. The ash content is too high, CAT recommends not to use Rotella and that's good enough for me.They do however say that if you do run Rotella change it more frequently. Detroit recom...
- Wed Oct 03, 2012 8:02 pm
- Forum: Projects
- Topic: Pearson Triton-Bluewater on a budget
- Replies: 45
- Views: 18318
Re: Pearson Triton-Bluewater on a budget
I don't think the engine replacement will be as big a deal as you may think. it's actually a good time to jerk it out of there and rebuild or replace while the interior is out of the boat. With the engine out it makes it a lot easier to clean and replace thru hulls etc. in that area of the Triton. I...
- Tue Oct 02, 2012 1:12 am
- Forum: Projects
- Topic: Pearson Triton-Bluewater on a budget
- Replies: 45
- Views: 18318
Re: Pearson Triton-Bluewater on a budget
I like Tim's method of cleaning an oily mess, which should work for you. Pressure washer and blast away! With your drain holes now in the hull, this problem won't happen again. In the cost of refitting, if your engine is toast, a replacement isn't a huge setback. For the Triton , a outboard well and...
- Sun Sep 30, 2012 7:59 pm
- Forum: Projects
- Topic: Pearson Triton-Bluewater on a budget
- Replies: 45
- Views: 18318
Re: Pearson Triton-Bluewater on a budget
Crazer, Look the simplest way to keep water from soaking the entire interior is to simply drill a hole in the hull below the sole, anywhere in the keel/bilge will work. Of all the steps in refitting one of these boats patching a 1/2" hole is the easiest thing. It sure saves a lot of repair from...
- Fri Sep 28, 2012 11:24 pm
- Forum: Questions and Answers
- Topic: Triton ownsers - props catching seaweed
- Replies: 1
- Views: 1243
- Wed Sep 26, 2012 10:02 pm
- Forum: Questions and Answers
- Topic: What is this for??
- Replies: 5
- Views: 2806
Re: What is this for??
Door Stop ??? no way, it's a walnut cracker!!
- Sat Sep 22, 2012 11:08 pm
- Forum: Questions and Answers
- Topic: What's a reasonable offer?
- Replies: 7
- Views: 2706
Re: What's a reasonable offer?
Well, Think about this, Is the owner paying a storage fee on the boat? If so, does he owe any storage fee now. Who will be responsible for that? It's very difficult to price someone else's property. $1000.00 could be a lot more than he wants for the boat. After 10 years of doing nothing he may just ...
- Mon Sep 10, 2012 12:10 pm
- Forum: Ramblings
- Topic: Stepping your own mast, launching your own boat
- Replies: 5
- Views: 3561
Re: Stepping your own mast, launching your own boat
Search for "dropping the mast" on youtube. This is the best vid I've seen on this and it works for raising and lowering. Or go to; Catalina27.org I tried to link but for some reason I can't.
- Mon Sep 10, 2012 12:02 pm
- Forum: Ramblings
- Topic: Stepping your own mast, launching your own boat
- Replies: 5
- Views: 3561
Re: Stepping your own mast, launching your own boat
If you're talking about a tongue extension for your trailer, that a pretty easy project to complete. Or are you talking about a dolly type setup with a line to your tow truck? Stepping your own mast isn't too difficult , check out youtube for some great video on this, if you can't find it, I have a ...
- Wed Jul 04, 2012 1:39 pm
- Forum: Questions and Answers
- Topic: Extending Rudder Shaft
- Replies: 3
- Views: 1081
Re: Extending Rudder Shaft
As an amateur hobby restorer, I see no problem with your plan. I would however brace the cockpit sole with some type of structure to stiffen the area. You wouldn't want the tube to be a brace by itself. A bushing where it ( rudder shaft) enters the hull and at the top would be very helpful in removi...
- Sat Jun 16, 2012 12:40 am
- Forum: Questions and Answers
- Topic: What The????
- Replies: 6
- Views: 1442
Re: What The????
Have you considered using a paint stripping agent?
- Mon Jun 04, 2012 11:31 am
- Forum: Questions and Answers
- Topic: Bedding stanchions
- Replies: 10
- Views: 2610
Re: Bedding stanchions
With my very limited experience, I think plywood is a very poor choice for backing plates for anything. Other than being cheap and easy to make there is no other benefit. I bought some 1/4" fiberglass flat stock from McMaster Carr and plan on using that. It won't compress or rot like plywood wi...
- Sat May 12, 2012 3:53 pm
- Forum: Pearson Triton Specifics
- Topic: Triton emblem
- Replies: 6
- Views: 3963
Re: Triton emblem
In a box shipped to me!!! No, the forward end, outside edge,of the coaming is correct, pretty rare survivors. Plated pot metal does poorly in a marine application.
- Mon Apr 30, 2012 5:26 pm
- Forum: Ramblings
- Topic: Pearson Electra Owner's association
- Replies: 4
- Views: 2921
Re: Pearson Electra Owner's association
I just acquired two Electras this week, should have them picked up by the first of next month. I might have just cornered the market on this model Pearson, That brings the total to five.. If I spend 3-5 thousand on each boat I may be able to sell them for $800- $900 when completed. Now that's real e...
- Mon Apr 23, 2012 1:00 pm
- Forum: Projects
- Topic: Sea Sprite 23 #137
- Replies: 18
- Views: 5769
Re: Sea Sprite 23 #137
Well Crazer, That beats my $20.00 for and Electra by $19.00. Nice looking vessel . How close to standing upright can you get in her??/LOL\
- Sat Feb 25, 2012 10:02 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Pearson Ensign Restoration
- Replies: 47
- Views: 24522
Re: Pearson Ensign Restoration
Scott , I have a stern section that could be grafted with as much of the hull as you need for this job. I would cut it off after you give me the measurement needed. I'll be home Sunday and Monday only. $75.00 and I'll ship COD.
- Fri Feb 24, 2012 10:25 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Pearson Ensign Restoration
- Replies: 47
- Views: 24522
Re: Pearson Ensign Restoration
Scott, before your team starts measuring and installing bulkheads and fixtures , place the deck on even if it's only temporary so the the hull isn't distorted when glassing in. You sure don't want to end up with a deck that doesn't fit.
- Fri Feb 24, 2012 10:21 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Pearson Ensign Restoration
- Replies: 47
- Views: 24522
Re: Pearson Ensign Restoration
It was carpenters chaulk, that's what they used to thicken epoxy for tabbing.
- Wed Feb 22, 2012 8:30 am
- Forum: Boat Photos
- Topic: One-off fiberglass dory - Another sort of plastic classic
- Replies: 1
- Views: 2031
Re: One-off fiberglass dory - Another sort of plastic classi
I don't think I could have resisted the purchase either, that is very nice and a great little history as well, Cheers
- Sat Feb 18, 2012 10:03 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Pearson Ensign Restoration
- Replies: 47
- Views: 24522
Re: Pearson Ensign Restoration
Sorry, Scott, I didn't scroll down to the end of thread, I see you got the parts ,GREAT!!!!
- Sat Feb 18, 2012 10:00 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Pearson Ensign Restoration
- Replies: 47
- Views: 24522
Re: Pearson Ensign Restoration
If the scouts ever plan on class racing they will be glad you went this route. Wouldn't you rather just graft on an original stern section, I think it would be easier. Scott , Did the tiller parts ever arrive? Are you satisfied? Carl
- Sat Feb 18, 2012 9:03 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Pearson Ensign Restoration
- Replies: 47
- Views: 24522
Re: Pearson Ensign Restoration
The more I look at the pictures I don't see how the replacement deck fits because that is not the Ensign style transom, something is way off there. I'm not talking about the wood, it's the shape.
- Wed Feb 08, 2012 3:40 pm
- Forum: Questions and Answers
- Topic: Seized throttle and shifter levers
- Replies: 10
- Views: 1622
Re: Seized throttle and shifter levers
These new are on Ebay for $87.00 by boaterbits. DUAL LEVER SIDE MOUNT MARINE ENGINE CONTROLS 60053
- Mon Feb 06, 2012 2:54 am
- Forum: Questions and Answers
- Topic: Seized throttle and shifter levers
- Replies: 10
- Views: 1622
Re: Seized throttle and shifter levers
Throttle and shift lever?? I thought the shift lever stuck through the floor and the throttle bolted to the side of the cockpit?? If all fails I have a stock throttle lever if I can find all the parts.
- Tue Jan 17, 2012 8:01 pm
- Forum: Questions and Answers
- Topic: How to fuel and Ankerlickt oil lamp?
- Replies: 6
- Views: 1436
Re: How to fuel and Ankerlickt oil lamp?
Find any place that's looks like it may be a joint and soak the crap out of it for several days with PB Blaster or Kroil penetrating oil or even Marvel mystery oil. I'm positive you don't refill at the wick. My guess is below the wick and flame adjustment is where it unscrews to refill, don't get in...
- Tue Jan 03, 2012 2:33 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Rot in my battery compartment
- Replies: 6
- Views: 3840
Re: Rot in my battery compartment
Batteries have an uncanny ability to attract moisture/ condensation (sweat). Are your batteries in a plastic battery box? After rebuilding the wood go with a battery box to encase the batteries.
- Tue Jan 03, 2012 2:23 pm
- Forum: Questions and Answers
- Topic: Shore power.
- Replies: 31
- Views: 7088
Re: Shore power.
OR..... maybe ..... A two post quick connect lead to the batteries for a charger, you can buy the whole shebang from a truck parts house or maybe a RV dealer. The connect is generally used for semi trucks when they have a hydraulic lift tailgate on the trailer. Or a romantic recessed mood light !!!!!!