Search found 1314 matches
- Sat Feb 26, 2011 11:37 am
- Forum: Projects
- Topic: Doing some work in the galley.
- Replies: 29
- Views: 4662
Re: Doing some work in the galley.
I mean, whether the curtain effect was actually officially less "fine" because it was made up of stripes of veneer .......... If by officially you mean the manufacturer's intentions for the better side, then yes. (the upper edge of the curtain "smiles" are veneer repeats of some...
- Sat Feb 26, 2011 12:13 am
- Forum: Projects
- Topic: Doing some work in the galley.
- Replies: 29
- Views: 4662
Re: Doing some work in the galley.
That looks fantastic, Tom. I don't know the correct terminology, but the "swags" in the veneer are pretty. They almost look like theatre curtains. Very often cabinet grade plywoods come with 2 different sides. The "A" side is made of one continuous piece of veneer and the "...
- Thu Feb 24, 2011 7:19 pm
- Forum: Questions and Answers
- Topic: boom height and effect of flying a smaller main.
- Replies: 16
- Views: 2911
Re: boom height and effect of flying a smaller main.
This is what I found searching for the sail plan of a Bristol 27. I am not so sure I would want to change the dimensions of the main all that much from the design. The last modification I would make would be to raise the boom. I reef a lot on my Renegade, and find the boat very balanced doing so. B...
- Thu Feb 24, 2011 3:30 pm
- Forum: Materials, Sources, and Innovations
- Topic: drop board U-channel
- Replies: 6
- Views: 1632
Re: drop board U-channel
To clarify . . . the box tubing was NOT anodised in the first place and, I did say: " I shall have both pieces anodized at the local plating shop". I know you did, that is exactly why I made the comment, to elaborate on the subject. It wasn't directed at you at all, but to comment on Bran...
- Thu Feb 24, 2011 9:20 am
- Forum: Materials, Sources, and Innovations
- Topic: drop board U-channel
- Replies: 6
- Views: 1632
Re: drop board U-channel
Anodized material when cut, drilled or sanded leaves a new surface that is not anodized. I don't see this as an option at any price. Making the pieces (cutting, sanding, drilling screw holes, whatever) then having them anodized is certainly a viable route, but is is really much cheaper than bronze o...
- Thu Feb 17, 2011 9:29 pm
- Forum: Boat Photos
- Topic: Year of build?
- Replies: 9
- Views: 2391
Re: Year of build?
I don't have any real knowledge on what the tradition is, but if rot is a concern, I don't think anything is more resistant to oxidation than gold for metals coins are made of.Rachel wrote:I had this idea that traditionally it was a copper coin, which might make sense with a wooden spar (against rot).
- Thu Feb 17, 2011 3:06 pm
- Forum: Pearson Triton Specifics
- Topic: year of manufacture
- Replies: 10
- Views: 4473
Re: year of manufacture
According to all good info Renegade 51 (Hirilondë as per the builders plate) had to have been built in 1967. The registration that came with the boat said 1968. It was a lot easier to get my RI title by just going with the documentation I had instead of trying to prove otherwise. It might have been ...
- Thu Feb 17, 2011 11:30 am
- Forum: Questions and Answers
- Topic: Priming... Just a few questions.
- Replies: 26
- Views: 6222
Re: Priming... Just a few questions.
I rolled and tipped the primer/high build coats on my boat, a Renegade that I painted completely. I did 4 coats of primer in one non-stop marathon day (app 16-18 hours) with no sanding between coats. Then sanded the entire boat in a marathon day the next day. It was the most brutal weekend of boat w...
- Mon Feb 07, 2011 11:32 pm
- Forum: Questions and Answers
- Topic: Stove Enclosure
- Replies: 22
- Views: 3219
Re: Stove Enclosure
Belt sanderTriton106 wrote: Does anyone have a tip on how to trim back 1/8" stainless steel sheets?
- Sat Feb 05, 2011 8:01 pm
- Forum: Projects
- Topic: First project of the year
- Replies: 30
- Views: 4357
Re: First project of the year
Famous last words ;>)Paulus wrote:Now all I have to do is..........
- Sat Feb 05, 2011 3:53 pm
- Forum: Questions and Answers
- Topic: Cetol or Varnish?......
- Replies: 53
- Views: 7941
Re: Cetol or Varnish?......
The previous owner of my boat painted all of the teak-veneered bulkheads and it's beginning to peel in some spots revealing a beautiful surface. I will bet that if you do succeed in removing the paint you will find the not so beautiful surface areas that prompted him/her to paint them. But if you w...
- Fri Feb 04, 2011 1:27 am
- Forum: Technical Data and Boat Nerdery
- Topic: Smartphone GPS
- Replies: 6
- Views: 3832
Re: Smartphone GPS
I don't have any experience with the marine GPS for a phone, but I did play with the auto GPS for a free month. I dropped the service (auto version) because I had no real use for it, but it was fun to try out. I would not be surprised if a marine version works fairly well, or at least soon will when...
- Fri Feb 04, 2011 1:17 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Hard (top) Dodger Construction
- Replies: 34
- Views: 8370
Re: Hard (top) Dodger Construction
Umm, errr, welll, maybe it rows better, but no inflatable rows really well. ;>)Triton106 wrote: With that modification it actually rows really well.
I agree with you about the quiet, but you need a hard boat to row well, and even then, just being hard alone doesn't mean it rows well.
- Thu Feb 03, 2011 7:21 pm
- Forum: Questions and Answers
- Topic: Floating rebuild
- Replies: 22
- Views: 4581
Re: Floating rebuild
Hence the question; How close is close admitting that no hull is symmetrical and therefore the waterline is not just a mathematical equation. 42 Actually, the designer probably did calculate the water line using math. In addition, the waterline may very well change depending on the design of the in...
- Thu Feb 03, 2011 6:53 pm
- Forum: Questions and Answers
- Topic: Cetol or Varnish?......
- Replies: 53
- Views: 7941
Re: Cetol or Varnish?......
2 techniques that help considerably for toe rails are as follows: 1. Prevarnish the bottom and sides of the toe rail before installation. Do at least 2 coats. You can do the top as well, but not critical to do so. This gets rid of the mechanical seam where varnish meets bedding that moisture gets th...
- Thu Feb 03, 2011 1:46 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Hard (top) Dodger Construction
- Replies: 34
- Views: 8370
Re: Hard (top) Dodger Construction
You're a sick man :>)Triton106 wrote: I actually enjoy rowing the old Zodiac than motoring with the new one - go figure.
- Wed Feb 02, 2011 9:47 am
- Forum: Questions and Answers
- Topic: Cetol or Varnish?......
- Replies: 53
- Views: 7941
Re: Cetol or Varnish?......
The only time I use epoxy as waterproofing is for plywood. The best example is when I build a plywood boat like my dinghy. I see nothing to gain in using epoxy as a "primer" for varnish. And like several have said, it creates more work when it does fail.
- Tue Feb 01, 2011 11:26 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Hard (top) Dodger Construction
- Replies: 34
- Views: 8370
Re: Hard (top) Dodger Construction
The vanity in me requires that everything I do on my boat has to look "right". By right, I mean to me, and includes all my quirks. I can only accept a soft dodger. I have concluded that the reasoning is that it represents removable. The fact that I never remove mine, except in storage, is ...
- Sun Jan 30, 2011 4:01 pm
- Forum: Questions and Answers
- Topic: More headroom?
- Replies: 5
- Views: 986
Re: More headroom?
Rachel is ever tactful and Tim gets right to the point. I will just say that I agree, it is a bad idea IMO.
- Sun Jan 30, 2011 3:56 pm
- Forum: Questions and Answers
- Topic: Cetol or Varnish?......
- Replies: 53
- Views: 7941
Re: Cetol or Varnish?......
Why use MEK? Because it's listed by the manufacturer as a thinner, as is acetone. The manufacturer does very little to warn you about the dangers of the isocyanates, it doesn't surprise me it recommends MEK as a thinner. I think Acetone is much safer. MEK is a mutagen and Acetone is almost drinkabl...
- Sun Jan 30, 2011 1:54 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Bending wood.
- Replies: 7
- Views: 2049
Re: Bending wood.
I did lay out the patterns on the mahogany cut the wood then scarf. Is this what you meant by your quote above? I think so. By using the boards to follow the curve before cutting/shaping them to the exact curve you save on a lot of the potential waste. So I'm onto what needs to be done and I think ...
- Sat Jan 29, 2011 10:55 am
- Forum: Questions and Answers
- Topic: Cetol or Varnish?......
- Replies: 53
- Views: 7941
Re: Cetol or Varnish?......
What a deadly combination of materials. I finish that contains isocyanates thinned with MEK. Don't do it any where near me please.miltonb wrote: I found it a little weird to apply until I thinned it about 10% with MEK.
- Sat Jan 29, 2011 10:44 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Bending wood.
- Replies: 7
- Views: 2049
Re: Bending wood.
Last year I spiled on my rub rail by scarfing together 3, - 10’ - 8” boards then laying out my pattern on the board and cutting 2 pieces, for each side, with my jig saw. This used a lot of excess material due to curve of the deck. It sure would. I think I would have scarfed the pieces together on a...
- Thu Jan 27, 2011 12:01 pm
- Forum: Questions and Answers
- Topic: Cetol or Varnish?......
- Replies: 53
- Views: 7941
Re: Cetol or Varnish?......
What Tim said.
You can not petrify wood and have it look good. Someday they may invent a synthetic that looks good and last a really long time. Someday they (the proverbial they) may do a lot of things. For now good old varnish is still the best result for the effort IMO.
You can not petrify wood and have it look good. Someday they may invent a synthetic that looks good and last a really long time. Someday they (the proverbial they) may do a lot of things. For now good old varnish is still the best result for the effort IMO.
- Fri Jan 21, 2011 3:27 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Rudder Replacement Options
- Replies: 37
- Views: 7267
Re: Rudder Replacement Options
I understand that the Okume only gets its BS 1088 by virtue of wood preservative. No, there are many things that make up the standard, and the choice of wood isn't even one. It has to do with laminate thikness (hence the number of laminations per given thickness), having no voids in laminations, gl...
- Fri Jan 21, 2011 10:36 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Rudder Replacement Options
- Replies: 37
- Views: 7267
Re: Rudder Replacement Options
Maybe this comment belongs in the Technical Data and Nerdery , section but for the record Okoume, aka Gaboon is not really a Mahogany. Like Cambara, Meranti, Luan and a host of other woods, even though marketed as a Mahogany, it really is not. Okoume is very strong and light weight, which is why the...
- Fri Jan 21, 2011 12:24 am
- Forum: Questions and Answers
- Topic: Bronzework / Machine Shop
- Replies: 6
- Views: 1409
Re: Bronzework / Machine Shop
Mystic Stainless does very nice work with bronze. Welding, shaping, fabricating and machining are all done. Charlie isn't cheap, but does great work.
- Wed Jan 12, 2011 12:33 pm
- Forum: Boat Photos
- Topic: Tehani celebrating her 50th this year!!
- Replies: 7
- Views: 2283
Re: Tehani celebrating her 50th this year!!
You 2 are certainly getting your money's worth this year. Good luck finishing the chores so you can go back to cruising.
- Tue Jan 11, 2011 12:55 pm
- Forum: Tools and Techniques
- Topic: A Fein modification and a simple jig
- Replies: 9
- Views: 4597
Re: A Fein modification and a simple jig
That said, being a stickler on simmetry, .. Why? When I see yours, all I can think of is that one side will "see" more material than the other... Who cares? (besides you) Spending more time playing with the shape, when it does nothing to enhance the work being done is pointless. Better to...
- Tue Jan 11, 2011 9:05 am
- Forum: Ramblings
- Topic: 34th Americas Cup
- Replies: 3
- Views: 848
Re: 34th Americas Cup
The fact that it is for the wealthy only has never bothered me. Even campaigning a Mini 6.5 is expensive by my standards. I just don't like that it has become a game of the courts, fights over silly designs, a promo for big business and down right silliness. I think they should go back to J Boats wi...
- Mon Jan 10, 2011 11:14 pm
- Forum: Questions and Answers
- Topic: Sewage Tank Connection concerns...
- Replies: 3
- Views: 474
Re: Sewage Tank Connection concerns...
Was this perhaps a custom made potable water tank, then replumbed as a holding tank? This would be my guess. I strongly suggest pulling the tank and going plastic. Not only are the repairs tedious and in the end futile, but a leaky holding tank is more than annoying, it is just plain unacceptable.
- Sun Jan 09, 2011 5:11 pm
- Forum: Questions and Answers
- Topic: Looking for boat hauler recommendations
- Replies: 12
- Views: 1768
Re: Looking for boat hauler recommendations
1) Pete and Wendy Stamm of Stonington Marine Transport , http://www.stoningtonmarine.com These folks are based in Connecticut, and will haul from/to the Chesapeake area (they work the whole US Atlantic Coast). Pete drives; Wendy runs the office. Great communication; both in office and from the road...
- Wed Jan 05, 2011 7:50 pm
- Forum: Classic Sailboats
- Topic: Alternatives to the Pearson Ensign?
- Replies: 61
- Views: 29394
Re: Alternatives to the Pearson Ensign?
A difference of a couple feet in that range is huge. I would not put even the Typhoon and the Ensign in the same class, never mind the CD 25. Not only do larger boats cost more (priced plus upgrades as the case may be) but the maintenance and in water storage range is large. How much is size worth t...
- Wed Jan 05, 2011 3:45 pm
- Forum: Questions and Answers
- Topic: SWIFTSURE 33
- Replies: 9
- Views: 2039
Re: SWIFTSURE 33
I wear Rhodes colored glasses all the time ;>)
- Mon Jan 03, 2011 9:44 am
- Forum: Projects
- Topic: First project of the year
- Replies: 30
- Views: 4357
Re: First project of the year
Not an expert in marine electgrical, but my gut instinct would be that the only possible problem to using a wood panel would be if it got wet and provided a potential source of path to ground for the hot leads.. Wood is an excellent insulator. If it is getting wet then the water is the problem, not...
- Sat Jan 01, 2011 10:28 am
- Forum: Boat Photos
- Topic: Could it be????
- Replies: 6
- Views: 2270
Re: Could it be????
........................ but it will be a few years 'till she's finished. Even if you don't count maintenance, you will find that you will never stop modifying/upgrading/rearranging stuff about your boat. And those of us who do it ourselves have this disease worse than anyone. The first step toward...
- Tue Dec 28, 2010 11:03 pm
- Forum: Classic Sailboats
- Topic: Now THAT is a centerboard...
- Replies: 20
- Views: 7940
Re: Now THAT is a centerboard...
The biggest advantage to a centerboard on a full keel boat is the draft. The boat can be designed with a shallower keel that utilizes a board to make up for the loss of lateral surface. I don't think the Swiftsure is any more maneuverable because of it. It would be slightly faster off the wind and d...
- Tue Dec 21, 2010 9:57 am
- Forum: Questions and Answers
- Topic: tarp rub
- Replies: 10
- Views: 1546
Re: tarp rub
It doesn't necessarily resolve the issue completely, but using a tarp that goes past the waterline makes a huge difference. There is a rubbing on the bottom paint, but that just saves you some sanding in the spring ;>)
- Fri Dec 17, 2010 10:39 am
- Forum: Pearson Triton Specifics
- Topic: Triton 234....I think
- Replies: 5
- Views: 2330
Re: Triton 234....I think
Welcome John. You will certainly find a wealth of info here, both general and Triton specific. My Renegade ice box is exactly where you mention, and I love the location. But a Renegade is a more full body hull and it is therefore very large. I am willing to compromise a lot of things, but when cruis...
- Thu Dec 16, 2010 4:28 pm
- Forum: Questions and Answers
- Topic: Handheld Chartplotters
- Replies: 4
- Views: 767
Re: Handheld Chartplotters
Maybe I am missing something, and this is quite possible, but where are you going in an inflatable that a GPS is necessary?
- Fri Dec 10, 2010 9:38 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Hello everyone...newbie here...t
- Replies: 4
- Views: 1179
Re: Hello everyone...newbie here...t
Welcome.
Yup, and prepayment is required. No asking questions until at least a dozen good shots have been posted ;>)Poda wrote: But as skipper says, pictures! The tithe for help is lots and lots of pictures! ;)
- Thu Dec 09, 2010 10:58 am
- Forum: Tools and Techniques
- Topic: Ergonomically friendly scraping method
- Replies: 8
- Views: 3818
Re: Ergonomically friendly scraping method
I will start by saying that your "boat sticks" Paulus, are the refinement of the chisel I used on my boat bottom the first winter of work. I found pushing much more back friendly, less tiring and more efficient than pulling normal scrapers. Good stuff! Have you arrived at an opinion about ...
- Wed Dec 08, 2010 1:45 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Plastic knot meter thru hulls
- Replies: 7
- Views: 1629
Re: Plastic knot meter thru hulls
Rags forced into the opening can stop, or at least significantly slow water coming in. Probably the best thing is knowing where all of your thru-hulls are, and having a plan which includes the implements needed. Figuring it all out while you are sinking is probably too late. As an emergency measure,...
- Tue Dec 07, 2010 2:11 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Plastic knot meter thru hulls
- Replies: 7
- Views: 1629
Re: Plastic knot meter thru hulls
I wouldn't be paranoid about it, but having DC Plugs handy is never a bad idea. Offshore races often require them to be tethered and ready at the site of every thru-hull. I would at least consider having all the needed sizes in some central, easy to access location. You can buy them, like these: DC ...
- Sat Dec 04, 2010 10:24 am
- Forum: Boatbuilding and Repair Techniques
- Topic: electrical upgrade
- Replies: 36
- Views: 8746
Re: electrical upgrade
Just to complicate things I will present another issue in setting up a new batter system. If you expect to charge all of your batteries from the same source, usually the engine alternator for most of us, then proximity to each other is a concern regarding the batteries. Should the wire leads from th...
- Fri Dec 03, 2010 10:44 am
- Forum: Boatbuilding and Repair Techniques
- Topic: electrical upgrade
- Replies: 36
- Views: 8746
Re: electrical upgrade
They aren't gas tight so that might concern some. I don't think I have ever seen a gas tight battery box. Current boxes are works of art. 3/4 marine ply all screwed and glassed together and look like art....really want to try to NOT have to rip those out. I don't blame you. Well constructed/install...
- Tue Nov 30, 2010 9:53 am
- Forum: Sailing and Cruising
- Topic: Howdy folks- been a while
- Replies: 4
- Views: 2467
Re: Howdy folks- been a while
Hey Charlie. Good to hear from you here and the B&B site. Hopefully your distractions aren't too serious and you can get back to your cruise as planned. I missed the get-together at Graham's and Carla's this fall though I did get to see Graham in Mystic this summer. I hear that I missed seeing T...
- Tue Nov 30, 2010 9:41 am
- Forum: Questions and Answers
- Topic: No Gelcoat?
- Replies: 5
- Views: 807
Re: No Gelcoat?
1. Quite possible 2. You can carefully sand through the layers and try to ID them as you go. I am not sure how successful you will be, not sure how successful anyone would be either really. If the hard layers you speak of are sound and your new bottom paint adheres well to it, I am not sure it is im...
- Tue Nov 30, 2010 9:20 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Alberg 35 Hull/Deck Joint Anatomy
- Replies: 10
- Views: 2305
Re: Alberg 35 Hull/Deck Joint Anatomy
End grain blocks absorb more resin during lamination and produce a better bond between skins and core. As far as water getting in and traveling due to capillary action or what ever I don't really think it matters. Once water gets to the core you have a problem regardless of orientation of the grain....
- Wed Nov 24, 2010 1:08 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Rudder Replacement Options
- Replies: 37
- Views: 7267
Re: Rudder Replacement Options
The rudder post, buy the way, turns out to be a solid piece of bronze - a good match with the solid bronze steering gear... This is typical of wooden boats and the early plastic boats that used traditional rudders. When it comes time to rebuild, and hopefully that is a ways off, I would suggest new...