Search found 284 matches
- Mon Jul 18, 2011 4:18 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: How does this outhaul work?
- Replies: 3
- Views: 1939
How does this outhaul work?
So yesterday I was up working on the boat (again...). I met a guy from a marine canvas maker to do all the measuring for a new bimini, dodger and sail cover (what the heck, it's only money). We had to put on the new main sail so he could see where the boom hangs, to determine the bimini and dodger h...
- Fri Jul 15, 2011 10:34 am
- Forum: Projects
- Topic: Bulkhead Joinery
- Replies: 12
- Views: 2955
Re: Bulkhead Joinery
I think either biscuits or a spline would be fine. I don't see the spline as being any more difficult or complicated than the biscuits, though. In either case, you're going to do the fine-tuning and trial fitting of the joint in the workshop, at the bench. My own preference would be for a full-lengt...
- Wed Jul 13, 2011 3:17 pm
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
the older saws look very cool (I only want a few dozen though.) Old handsaws are like coat hangers. You put two of them together in a drawer or cabinet, and when you come back later, you find they've reproduced. Over the past few years, I've sold most of the handsaws I had accumulated over the year...
- Wed Jul 13, 2011 10:12 am
- Forum: Ramblings
- Topic: Another outstanding bad boat name
- Replies: 111
- Views: 41930
Re: Another outstanding bad boat name
Seen on the transom of a big old 50-foot 1970's motor yacht:
Miss Mymoney
urgh.
Miss Mymoney
urgh.
Re: Progress
SWOON...
I'm in love.
- Wed Jul 13, 2011 8:01 am
- Forum: Projects
- Topic: Bulkhead Joinery
- Replies: 12
- Views: 2955
Re: Bulkhead Joinery
I would try to find a way to hide the joint with some kind of trim element. Make it look like frame-and-panel joinery or something. I think it would be difficult to hide an edge joint, particularly if it's going to be finished bright, but depending on what kind of plywood you'll use (e.g., mahogany ...
- Wed Jul 13, 2011 7:39 am
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
It really depends on what you're wanting to do with it. There are all kinds of saws, for different purposes. You want a dovetail saw? A tenon saw? A carcase saw? A cabinetmaker's crosscut? A finish carpenter's crosscut? A ripsaw? If you're thinking about serious woodworking, you're going to want to ...
- Tue Jul 12, 2011 5:13 pm
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
I submit that you will find those new handsaws a chore to use and unpleasant. A good, old handsaw, properly sharpened, is a joy to use. Modern handsaws are not "hung" right, just don't feel right in the hand and don't glide through the wood the way a quality old Disston or similar quality ...
- Mon Jul 11, 2011 1:39 pm
- Forum: Classic Sailboats
- Topic: Alternatives to the Pearson Ensign?
- Replies: 61
- Views: 29720
- Mon Jul 11, 2011 9:30 am
- Forum: Classic Sailboats
- Topic: Alternatives to the Pearson Ensign?
- Replies: 61
- Views: 29720
Re: Alternatives to the Pearson Ensign?
Rainbow? I know of three for sale at $500 each. They each need some work, but from what I've been told, they're fantastic sailers. One of the three is at the boatyard where my boat currently is, and every time I drive in, I have to drive right past it. I've gone up and looked at it more than once an...
- Sun Jul 10, 2011 6:53 pm
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
There actually is a lot to know about "sandpaper" and grit designations. There are at least three (probably more) different numbering systems for specifying sandpaper grit sizes - so a P120 is not the same as a 120 in a different system. There are lots of other variables as well, including...
- Sun Jul 10, 2011 6:47 pm
- Forum: Projects
- Topic: What I'm doing with my boat, 2011, before Spring (hopefully)
- Replies: 138
- Views: 35581
Re: What I'm doing with my boat, 2011, before Spring (hopefully)
I'm thinking I need to re-name my thread here. I need to delete the "before Spring". As it is now, I'm thinking hopefully I'll get it done before 2011 is over... Anyhow, I'm Inching closer to getting the engine back in the boat... Went back up to the boat again today - another crazy hot da...
- Wed Jul 06, 2011 2:06 pm
- Forum: Questions and Answers
- Topic: prop orientation
- Replies: 9
- Views: 1337
Re: prop orientation
Why would it matter whether the propellor "sings" with a bong rather than a clank? It's not a church bell or symphony gong - it's a boat propellor. I could see that a dull thud or clunk *might* *maybe* *could* indicate a crack somewhere in the propellor, but I do not think that just becaus...
- Wed Jul 06, 2011 2:04 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: fuel tank
- Replies: 9
- Views: 3236
Re: fuel tank
I would consult both USCG regulatory requirements as well as ABYC standards. I would be seriously hesitant to try going about fabbing up my own fuel tank. It's one thing if your fresh water or even grey or black water holding tank leaks or ruptures inside your boat; it's quite another when a tank ho...
- Tue Jul 05, 2011 6:53 pm
- Forum: Sails, Rigging, and Systems
- Topic: A4 sticking valves, haulout
- Replies: 28
- Views: 8069
Re: A4 sticking valves, haulout
I love my Atomic 4. Great little engine. You can see my long and bloody engine overhaul thread here , complete with tons of full color photos. The actual removal of the engine from the boat is shown on page 3 of the thread; the full-bore teardown to every last nut and bolt starts on page 4. I just g...
- Tue Jul 05, 2011 1:38 pm
- Forum: Materials, Sources, and Innovations
- Topic: Improving an older mainsail by Sailcare
- Replies: 12
- Views: 4984
Re: Improving an older mainsail by Sailcare
By the way, if you decide to look for a "new" sail, don't forget about used, reconditions sails. I think Sailcare sells some, but as far as shopping for used sails, I've always seen Bacon Sails recommended. I've never done any business with them myself, though. But from what I've heard, th...
- Tue Jul 05, 2011 1:32 pm
- Forum: Projects
- Topic: What I'm doing with my boat, 2011, before Spring (hopefully)
- Replies: 138
- Views: 35581
Re: What I'm doing with my boat, 2011, before Spring (hopefully)
Hey, if I come over on my lawyer time, rather than my "spare" time, you probably would not like my rates!
- Tue Jul 05, 2011 12:24 pm
- Forum: Projects
- Topic: What I'm doing with my boat, 2011, before Spring (hopefully)
- Replies: 138
- Views: 35581
Re: What I'm doing with my boat, 2011, before Spring (hopefully)
Sure. But what is this "spare time" thing of which you speak? Yesterday afternoon, I fired up my engine again, just because I could and I wanted to hear it again. I also had to do the final head re-torquing to confirm all head nuts are properly torqued. The Moyer Manual specifies that you ...
- Mon Jul 04, 2011 5:12 pm
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
Yes, use a decent-quality brush with varnish to get the best results. Those foam brushes tend to not only leave bubbles, but also will start to disintegrate and leave tiny little bits of black foam in your varnish. Don't ask me how I know this. And don't use those cheap "chip" brushes - th...
- Sun Jul 03, 2011 6:49 pm
- Forum: Projects
- Topic: What I'm doing with my boat, 2011, before Spring (hopefully)
- Replies: 138
- Views: 35581
Re: What I'm doing with my boat, 2011, before Spring (hopefully)
Went up to the boatyard today and applied the first coat of Bilgekote: http://i648.photobucket.com/albums/uu207/ilikerust/Grizabella/OnTheHardJanuary2011/SUC53979.jpg It was so ridiculously stinkin' hot and humid - I literally was dripping sweat continuously - and half the time, it dripped into the ...
- Thu Jun 30, 2011 11:56 pm
- Forum: Questions and Answers
- Topic: Water Heater
- Replies: 8
- Views: 1378
Re: Water Heater
Oops, I re-read your post and realized you're asking for a heater that is JUST a heat exchanger; no electric. That is what I would be looking for also.
I didn't realize those heaters were also electric...
To quote the infamous Emily Litella: "nevermind."
I didn't realize those heaters were also electric...
To quote the infamous Emily Litella: "nevermind."
- Thu Jun 30, 2011 11:54 pm
- Forum: Questions and Answers
- Topic: Water Heater
- Replies: 8
- Views: 1378
Re: Water Heater
I am just starting to think about putting in a small heat-exchanger water heater myself. Your question prompted me to do a little Googling. Based on the prices, it doesn't look like I'll be putting one in anytime soon... http://www.jamestowndistributors.com/userportal/show_product.do?pid=1537&fa...
- Mon Jun 27, 2011 6:06 pm
- Forum: Materials, Sources, and Innovations
- Topic: Improving an older mainsail by Sailcare
- Replies: 12
- Views: 4984
Re: Improving an older mainsail by Sailcare
Yes, it was for my Wanderer. You know, right now I'm not recalling the exact amount. I'll need to lay my hands on the receipt. But I do know that I had him add two sets of reef points, which cost a little extra. And as I recall, there are four battens. And I had him apply the Wanderer logo (a styliz...
- Mon Jun 27, 2011 2:22 pm
- Forum: Materials, Sources, and Innovations
- Topic: Improving an older mainsail by Sailcare
- Replies: 12
- Views: 4984
Re: Improving an older mainsail by Sailcare
That is a good point, and one that Jerry emphasized to me. I sent him my main sail just before Christmas - he told me not to wait, because they do get crazy busy in Spring. As I recall, the brand new sail (with my old one in the box with it) showed up right at the end of March/early April.
- Mon Jun 27, 2011 1:15 pm
- Forum: Materials, Sources, and Innovations
- Topic: Improving an older mainsail by Sailcare
- Replies: 12
- Views: 4984
Re: Improving an older mainsail by Sailcare
I wholeheartedly endorse Sailcare. The previous owner of my boat had the head sail cleaned and treated by them, and he told me it made a huge difference. He recommended I send the main sail for the same treatment. Jerry, who is the guy that typically answers the phone, clearly has a hell of a lot of...
- Mon Jun 27, 2011 1:10 pm
- Forum: Classic Sailboats
- Topic: Classic- not plastic
- Replies: 1
- Views: 2433
Re: Classic- not plastic
I'd post the question over at the Wooden Boat Forum - someone there will know what she is. Pretty little thing, though!
- Mon Jun 27, 2011 1:09 pm
- Forum: Ramblings
- Topic: Another outstanding bad boat name
- Replies: 111
- Views: 41930
Re: Another outstanding bad boat name
Just a few days ago I was reading about Boat U.S.'s annual survey of most common boat names. Number one on the list was "Wet Dream." Not only is it unoriginal, it's also not half as clever or funny as those choosing it evidently think it is.
- Sun Jun 26, 2011 7:44 pm
- Forum: Projects
- Topic: What I'm doing with my boat, 2011, before Spring (hopefully)
- Replies: 138
- Views: 35581
Re: What I'm doing with my boat, 2011, before Spring (hopefully)
O.K., so I had to travel to L.A. for business for 2-1/2 weeks, so no work done on the boat. I got back on June 17 (a week ago Friday). The weekend before I left, I finished putting my Atomic 4 engine back together, set up a test stand and tried to start it. You can see a bunch of pics of the reassem...
- Fri Jun 24, 2011 9:06 am
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
Also, perhaps applying a thinned coat of epoxy first would help minimize this, by being thin enough to allow any trapped bubbles to escape all the way out, and then after curing, it would seal the wood surface and prevent any more air bubbles from coming out? Give it a light sanding and cleaning, an...
- Fri Jun 24, 2011 8:17 am
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
Are those air bubbles, or dust particles?
- Thu Jun 23, 2011 10:09 am
- Forum: Ramblings
- Topic: Faces in the boat...
- Replies: 73
- Views: 28652
Re: Faces in the boat...
That would do it. Ugliest car since the AMC Pacer.Rachel wrote:Pontiac Aztec on his tail.
- Thu Jun 23, 2011 8:21 am
- Forum: Ramblings
- Topic: Faces in the boat...
- Replies: 73
- Views: 28652
Re: Faces in the boat...
Holy cr*p! What did he see? Not sure I'd like to see it myself. That's one surprised as hell tail light.
- Mon Jun 20, 2011 4:03 pm
- Forum: Questions and Answers
- Topic: Do I really need 2 isolated banks?
- Replies: 4
- Views: 609
Re: Do I really need 2 isolated banks?
Sounds to me like you don't need the two separate banks. I've been reading Nigel Calder's "Boatowner's Mechanical and Electrical Manual," and he's got a whole chapter on batteries and charging systems. In that chapter, there is a whole section titled "Is it Better to Have One or Two B...
- Mon Jun 20, 2011 3:43 pm
- Forum: Questions and Answers
- Topic: Bilge Pump Wiring; 2 Positive Paths OK?
- Replies: 10
- Views: 1714
Re: Bilge Pump Wiring; 2 Positive Paths OK?
Good idea, and one I think I will use! And yes, no problem - if both switches are closed, you've basically got two wires going the same way - it's the same as if you completed the circuit using one wire that is twice the diameter of either of those wires alone. The wire will carry only the voltage t...
- Thu Jun 16, 2011 8:28 pm
- Forum: Questions and Answers
- Topic: What bedding for hardware on varnished spars?
- Replies: 7
- Views: 1108
Re: What bedding for hardware on varnished spars?
Butyl rubber tape or Dolfinite?
- Thu Jun 16, 2011 8:24 pm
- Forum: Materials, Sources, and Innovations
- Topic: Round Chain Pipe
- Replies: 6
- Views: 2612
- Thu Jun 16, 2011 8:15 pm
- Forum: Materials, Sources, and Innovations
- Topic: Round Chain Pipe
- Replies: 6
- Views: 2612
- Wed Jun 15, 2011 10:42 pm
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
You will find it quite useful. A couple years ago, I needed a sanding machine on short notice, so despite my aversion to modern shiny plastic and aluminum tools, I ran out and bought the Ridgid oscillating benchtop spindle/belt sander. It's actually a pretty darn good little machine, and I've used i...
- Wed Jun 15, 2011 6:02 pm
- Forum: Boat Photos
- Topic: Some More "Self Reflection" Photos
- Replies: 9
- Views: 3715
Re: Some More "Self Reflection" Photos
"Far from perfect"?
I would be THRILLED if my boat looked that good.
Run with it.
I would be THRILLED if my boat looked that good.
Run with it.
- Tue Jun 14, 2011 11:40 am
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
I have probably 10 utility knives, if not more. I keep them everywhere, so I never have to hunt too much to find one. I also keep a couple of those 100-blade packs about so I never run out of new blades - they actually wear out pretty quickly when you're using them aggressively. And I have managed t...
- Tue Jun 14, 2011 11:38 am
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
- Mon Jun 13, 2011 10:06 pm
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
I find my reciprocating saw to be indispensible. I've had it for probably close to 15 years, and I've had several projects I couldn't have done without it. But it's the wrong tool for the job you depicted. It's a demolition tool, mostly. Very useful for cutting pipe and angle iron to length using ha...
- Mon Jun 13, 2011 4:38 pm
- Forum: Ramblings
- Topic: National Park Service maybe increasing access to Chesapeake
- Replies: 0
- Views: 1446
National Park Service maybe increasing access to Chesapeake
Just received via e-mail from Boat U.S. - seems a worthy issue to make everyone aware of, in case you're not a Boat U.S. member or don't get the e-mails. Do you think boaters need better public access sites around the Bay? The National Park Service wants to know. They are holding a series of public ...
- Sun Jun 12, 2011 10:54 pm
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
Cut it oversize using a hand saw or jigsaw, use a belt sander, or a rasp and then files, or a block plane, and then sand paper, to smooth it down to the profile.
- Wed Jun 08, 2011 9:33 pm
- Forum: Ramblings
- Topic: Richmond / Central Virginia forum members
- Replies: 52
- Views: 11237
Re: Richmond / Get together/sailing plans
Bill, Any progress on the 8.3 move? See my last post above, re: "SEP". I can report that after they completed their ASA101 sailing class, and getting some suggestions from the instructor about getting the Atomic 4 running (in addition to my suggestions) they decided to give it a go themse...
- Sun Jun 05, 2011 9:02 pm
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
What? House projects versus Plastic Classics forum? Priorities, man!
- Sun Jun 05, 2011 6:58 pm
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
OK, now you need to resize the photos in Photobucket to make them a little smaller. Make them no bigger than 640 x 480 as a good rule of thumb.
- Sun Jun 05, 2011 4:28 pm
- Forum: Projects
- Topic: Coronado 15 project.
- Replies: 389
- Views: 224620
Re: Coronado 15 project.
If there is a better way to get good image posted, please let me know. Yes - rather than uploading them directly to the thread here, upload the pics to a free photo hosting site - I use Photobucket - then use the "IMG" tags to link to the photo, and it will show up in the thread here. In ...
- Sun Jun 05, 2011 1:36 pm
- Forum: Materials, Sources, and Innovations
- Topic: Need halyards, sheets, rope, cord?
- Replies: 8
- Views: 8388
Re: Need halyards, sheets, rope, cord?
I have found the same to be true with just about any supplies or materials. You can find pretty much anything you can get at West Marine elsewhere significantly cheaper - it's just a matter of searching for it on the Internet and waiting for it to be shipped to you. I always figure if I buy somethin...
- Fri Jun 03, 2011 10:04 am
- Forum: Sails, Rigging, and Systems
- Topic: Stolen jib...
- Replies: 6
- Views: 3229
Re: Stolen jib...
I would try Bacon Sails - they sell a lot of used sails. I had a new main sail made by Sail Care and was very happy with their service. So you might try them.