The Plastic Classic Forum, your free and in-depth resource for information on re/building classic sailboats. ... Be sure to visit / join our sister site at sailFar.net! ... And don't forget to check out Atom's Virtual Home Port! ...

Diaphram type bilge pump

Talk about favorite or hated suppliers, recommend good materials or sources, or anything of the same ilk. This is also a good place to suggest unique ideas and innovations you may have come up with.
Forum rules
Post Reply
Ryan
Skilled Systems Installer
Posts: 223
Joined: Wed Aug 17, 2005 2:14 pm
Location: NE GA

Diaphram type bilge pump

Post by Ryan »

I have decided to use a diaphragm type bilge pump on my boat in an attempt to be able to pump the bilge as dry as possible. Does anyone have any favorite brands, or brands to stay away from? Any reasons (other than cost) to not go this route? I plan to use a high volume impeller pump mounted a couple of inches higher than the diaphragm pump on an automatic float switch to handle any major water (which I hope never happens!). Thanks!
Top
User avatar
Tim
Shipwright Extraordinaire
Posts: 5708
Joined: Tue Apr 01, 2003 6:39 pm
Boat Name: Glissando
Boat Type: Pearson Triton
Location: Whitefield, ME
Contact:
Contact Tim

Post by Tim »

This is the premium way to go, and I recommend the installation.

As to pump types, I usually favor Jabsco, though not because of any particular personal negative experience with other brands.
---------------------------------------------------
Forum Founder--No Longer Participating
Top
Ryan
Skilled Systems Installer
Posts: 223
Joined: Wed Aug 17, 2005 2:14 pm
Location: NE GA

Post by Ryan »

Thanks Tim. I have been eyeing the Jabsco, though like you, I have no reason to ignore any other brands.
Top
Post Reply

Return to “Materials, Sources, and Innovations”