The Plastic Classic Forum, your free and in-depth resource for information on re/building classic sailboats. ... Be sure to visit / join our sister site at sailFar.net! ... And don't forget to check out Atom's Virtual Home Port! ...

DELETED

Talk about favorite or hated suppliers, recommend good materials or sources, or anything of the same ilk. This is also a good place to suggest unique ideas and innovations you may have come up with.
Forum rules
Post Reply
DELETED

Metal Supplier

Post by DELETED »

DELETED
Top
User avatar
Ceasar Choppy
Boat Obsession Medal Finalist
Posts: 622
Joined: Thu Mar 09, 2006 11:05 am
Location: Port Starboard, MD

Post by Ceasar Choppy »

I've had good luck with these guys in the past too.
Top
Ancient Race
Almost a Finish Carpenter
Posts: 94
Joined: Wed Aug 30, 2006 9:41 pm
Location: Cleveland

Post by Ancient Race »

Yep; I'll happily third onlinemetals.com.
Tartan 27 #77
Seafarer Meridian 26
Jet 14 #952
Top
CharlieJ
Wood Whisperer
Posts: 649
Joined: Fri Aug 19, 2005 7:42 pm
Location: South coast of Texas, Matagorda Bay

Post by CharlieJ »

And another customer.

Last I used them after I placed the order they called back- one of the tubes they had in stock was ONE SIXTEENTH inch shorter than I specified- they called to see if that was ok or did they need to wait for a new shipment!!

Needless to say, I'll be using them again.
Top
Post Reply

Return to “Materials, Sources, and Innovations”