The Plastic Classic Forum, your free and in-depth resource for information on re/building classic sailboats. ... Be sure to visit / join our sister site at sailFar.net! ... And don't forget to check out Atom's Virtual Home Port! ...

LK IV Progress update.

Post photos and descriptions of your ongoing projects here. No project is too big or too small.
Forum rules
Post Reply
Oscar
Candidate for Boat-Obsession Medal
Posts: 320
Joined: Thu Aug 16, 2007 6:54 pm
Boat Name: Lady Kay IV
Boat Type: 1990 Dragonfly 25
Location: Bethlehem, PA
Contact:
Contact Oscar

LK IV Progress update.

Post by Oscar »

Plugs are back in the deck, and decks sanded down. I have decided NOT to put a foam layer on the deck as discussed elsewhere. I am still riveting the joint, but will be using solid aircraft rivets. Over the deck and the joint to the topsides will go a biaxial/mat stitched combo. BEAUTIFUL stuff, about 25 ounces/yard. Test pieces are most promising. This time around I am not ready for vacuum, but I can roll heavy plastic down the entire length and put loose sand on it.....then a few strips of wood and spring clamps around the flange, should work.

Image

Have started working on the trailer solution. I think this is where the twins will ride..... 8'6" at the fenders, 8' above.

Image
Out there, alone, there is only truth.
Top
User avatar
Chris Campbell
Candidate for Boat-Obsession Medal
Posts: 422
Joined: Tue Jun 06, 2006 9:18 am
Boat Name: Luna
Boat Type: Yankee 30
Location: Chester, NS
Contact:
Contact Chris Campbell

Re: LK IV Progress update.

Post by Chris Campbell »

Nice work! She's looking good, and it won't be long now 'till you're sailing. I am, of course, envious of everyone who will launch this year, but have only myself to blame.

Congrats, and keep keeping us posted!

Cheers,

Chris
Top
Post Reply

Return to “Projects”