My Icebox
Posted: Wed Dec 16, 2009 2:05 pm
I decided some time ago that I couldn’t put up with the original, grossly inefficient icebox. Unfortunately, the box must have been made before the deck mold was added to the hull, and lies in a nearly inaccessible area under the starboard cockpit seat.
Consequently, there was no way the box could be built even in the cabin and moved into position without completely removing the entire molded galley structure. The outer box and insulation has had to be built in position. However, since I have reduced the size of the liner to accommodate 4 inches of insulation, I have been able to build the liner in my basement.
So far, I’m about half way through with the work. Here are a few photos of the project where I am today.
There are more construction photos here:
http://s63.photobucket.com/albums/h127/ ... us/Icebox/
Joe
Consequently, there was no way the box could be built even in the cabin and moved into position without completely removing the entire molded galley structure. The outer box and insulation has had to be built in position. However, since I have reduced the size of the liner to accommodate 4 inches of insulation, I have been able to build the liner in my basement.
So far, I’m about half way through with the work. Here are a few photos of the project where I am today.
There are more construction photos here:
http://s63.photobucket.com/albums/h127/ ... us/Icebox/
Joe