Rehab of a Designers Choice 15

Post photos and descriptions of your ongoing projects here. No project is too big or too small.
Post Reply
Ric in Richmond
Boat Obsession Medal Finalist
Posts: 518
Joined: Fri Sep 09, 2005 12:26 am
Boat Name: Andiamo
Boat Type: Alberg 35
Location: Richmond VA

Rehab of a Designers Choice 15

Post by Ric in Richmond »

I got a call from a neighbor asking if I knew anyone who wanted a sailboat before he called the junk guy.

I decided I'd drag it home and see what we could make of it.

This boat has sat outside at least 10 years, under the trees, with sails out in the cockpit and nothing taken care of.

Image

That is not stone....that is non skid with lichen???

Image

Digging out commences:

Image

Hole in the main:
Image

That is a jib:

Image

Growth on the halyards:

Image

Sails actually cleaned up way better than I thought....of course there is the issue of the holes!!

Image

Image

Not too shabby for a free boat:
Image

Image

So far I haven't put a dime into it...but the time to spend a bit approaches.

I still need to find the rudder, tiller, thwart and jib fairleads. (supposedly in the shed at the previous owners place) Compound the deck and hull. Get some tires from this decade. Register the trailer. Get the main sail patched. I am sure a bunch of other misc things...

More pics here:

http://andiamoadventures.blogspot.com/2 ... rehab.html

Info on the Designers Choice 15:

http://sparkmanstephens.blogspot.com/20 ... ce-15.html

Image

If anyone has a set of sails for one of these let me know. New suit will be about $1000.00!
Ric Bergstrom

http://andiamoadventures.blogspot.com/

Archived old blog:

http://andiamo35.blogspot.com/

~~~~~([\~~~([\~~([\~~~~~~([\~~([\~~~~~~
~~~~~~([\~~~~~~~([\~~~~~~~~~~~~~~~
TampaBay
Candidate for Boat-Obsession Medal
Posts: 391
Joined: Wed Sep 30, 2009 3:46 pm
Boat Type: Coronado 15

Re: Rehab of a Designers Choice 15

Post by TampaBay »

Good looking boat. A new set of sails would be cool, and ok used sails are all over the place. What is holding the centerboard on?
Ric in Richmond
Boat Obsession Medal Finalist
Posts: 518
Joined: Fri Sep 09, 2005 12:26 am
Boat Name: Andiamo
Boat Type: Alberg 35
Location: Richmond VA

Re: Rehab of a Designers Choice 15

Post by Ric in Richmond »

I got the local sail maker repairing the main for $60.00.

The center board is bolted into the trunk and has a pennant to rais and lower it. The thwart should have a pair of cleats on it to hold it up or down.
Ric Bergstrom

http://andiamoadventures.blogspot.com/

Archived old blog:

http://andiamo35.blogspot.com/

~~~~~([\~~~([\~~([\~~~~~~([\~~([\~~~~~~
~~~~~~([\~~~~~~~([\~~~~~~~~~~~~~~~
TampaBay
Candidate for Boat-Obsession Medal
Posts: 391
Joined: Wed Sep 30, 2009 3:46 pm
Boat Type: Coronado 15

Re: Rehab of a Designers Choice 15

Post by TampaBay »

Good looking project; sort of reminds me of my own. I am sure there is more to fixing this boat, than simply scrubing the decks and a 60 dollar sail repair. If that is true all I can say is "have a good time sailing;" as I sit in my living room surrounded by clamps and saws, and sandpaper and countless other tools. :)
Ric in Richmond
Boat Obsession Medal Finalist
Posts: 518
Joined: Fri Sep 09, 2005 12:26 am
Boat Name: Andiamo
Boat Type: Alberg 35
Location: Richmond VA

Re: Rehab of a Designers Choice 15

Post by Ric in Richmond »

The entire list:

Replace tires
Register trailer
New outhaul line (has one on it but it seems too short)
Check trailer lights
New polypropylene line for trailer winch


I am sure the sails aren't too long for this world even in I get a decent repair. SItting out side that long has to create issues!


Hopefully find: (previous owner gets back from vacation this weekend....hopefully I can get in his shed to look)
Tiller
Rudder
Thwart


I have the plug out of the hull and the bow raised high and it still drips a small amount of water. I did drain a bunch of water out of the space between the hull and deck before I transported her. She was parked bow slightly bow down down. I think water got in around inspection port as that is the only access to this space.

I also hosed out this space once I got the inspection port open. I am thinking there is some water logged foam inside? I may need to shove my blackberry in there and shoot some video to see what is inside.

This also held water on the deck/cockpit that has lead to small blisters where is stayed consistently wet. Not enough to grind it off and paint, but annoying none the less. The deck is self bailing with big ports in the transom that drain the entire deck surface.
Ric Bergstrom

http://andiamoadventures.blogspot.com/

Archived old blog:

http://andiamo35.blogspot.com/

~~~~~([\~~~([\~~([\~~~~~~([\~~([\~~~~~~
~~~~~~([\~~~~~~~([\~~~~~~~~~~~~~~~
Post Reply