I need to know if Yanmar has a recommended lbs. of Torque for the exhaust riser bolts (4).
I replaced the mixing elbow and would like to set the bolts on the exhaust riser to factory specs so I do not crush the new gasket.
Thanks
Ron
Yanmar 2GM20 F Exhaust Riser bolt Torque specs
Yanmar 2GM20 F Exhaust Riser bolt Torque specs
Ron
S/V Kummi II
Halmon 27 Horizon
S/V Kummi II
Halmon 27 Horizon
-
Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
Re: Yanmar 2GM20 F Exhaust Riser bolt Torque specs
According to my Yanmar service manual, there is not a specifically-mentioned torque spec for the exhaust riser bolts.
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
-
Peter
- Boat Obsession Medal Finalist
- Posts: 580
- Joined: Mon Nov 15, 2004 11:23 pm
- Boat Name: Pagan
- Boat Type: Albin Ballad 30
- Location: Pedder Bay (Victoria), BC, Canada
- Contact:
Re: Yanmar 2GM20 F Exhaust Riser bolt Torque specs
Ron,
You may be able to find what you need in the GM/HM manual at http://www.motoren.ath.cx/menus/yanmar.html
Hope this helps.
You may be able to find what you need in the GM/HM manual at http://www.motoren.ath.cx/menus/yanmar.html
Hope this helps.
