Invicta on Ebay (Rachael)
Not to sound unfaithful to my Alberg 30, but if that boat were in the Chesapeake, my e-Bay trigger finger would poised above the mouse. Probably a good thing it's in Florida. Of course I'm still watching the auction closely, and folks at the yard are "helpfully" saying what a great boat the Invicta is (like I need encouragement).
It's probably a tad large for me, but it's one of my ultimate "big" boats.
Could you find me one nearer the Chesapeake and/or in slightly better shape, please? (and it has to be a bubble-top):D
Rachel
It's probably a tad large for me, but it's one of my ultimate "big" boats.
Could you find me one nearer the Chesapeake and/or in slightly better shape, please? (and it has to be a bubble-top):D
Rachel
-
- Skilled Systems Installer
- Posts: 200
- Joined: Wed Jan 11, 2006 12:50 am
- Location: Massachusetts
- Contact:
My introduction to the Invicta was in Saugatuck Michigan a couple year's back. My wife and I were walking the docks and I noticed a beauty across the way. This boat was in great shape, probably one of the best examples out there. It is used as a chartering vessel. Here is their home page:
http://www.sweetwatersailing.com/
Beauty!
http://www.sweetwatersailing.com/
Beauty!
Fuji 32 Ketch "Excalibur"
I spoke to this guy a few times when we first got Scout. I believe he still does charter. He was to a point where he would charter in the summer and transport his boat down south for winter cruising. Not a bad life. I also ran into another Ivicta owner who did some buddy boating with him and sent a picture or two... (Mort had a yawl and removed his mizzen - boo hoo)
[img][img]http://img.photobucket.com/albums/v316/ ... owe3-1.jpg[/img][/img]
I know I had a pictue of the two of their Invicta's rafted up but I can't seem to find it. I have just noticed for the first time that the stern hatches in one picture are different than the other.
[img][img]http://img.photobucket.com/albums/v316/ ... owe3-1.jpg[/img][/img]
I know I had a pictue of the two of their Invicta's rafted up but I can't seem to find it. I have just noticed for the first time that the stern hatches in one picture are different than the other.
-
- Bottom Paint Application Technician
- Posts: 16
- Joined: Thu Feb 10, 2005 12:33 pm
- Location: Schenectady N.Y. / East Boothbay Maine
Well for better or worse Topaz Invicta hull #14 has been purchased. It is being towed to a yard tomorrow, Masts unstepped and prepaired for shipping next week.
When she arrives here I will clean, strip and tent her with tarp and frame so sun can dry her all summer. This fall we will move her in the barn.
As I have just passed the half way point "two years" on my Bounty II yawl "Sea Yawl" Topaz will have lots of time for drying. I will try to identify wet deckcore areas and get them opened before freezing temps this year. Real work will begn next year.
Scout, would you take some pictures of your pushpit for me? I would like to get that ordered this year.
Most of the damage to this boat has been from hurricans. She has been at Dinner Key for 16 years and servived Andrew and many others.
PS: Anyone with suggestions of a hauler? The quote I got from the guy I have used for years is up 2K from when he brought SeaYawl two years ago! Miami to Schenectady N.Y.
When she arrives here I will clean, strip and tent her with tarp and frame so sun can dry her all summer. This fall we will move her in the barn.
As I have just passed the half way point "two years" on my Bounty II yawl "Sea Yawl" Topaz will have lots of time for drying. I will try to identify wet deckcore areas and get them opened before freezing temps this year. Real work will begn next year.
Scout, would you take some pictures of your pushpit for me? I would like to get that ordered this year.
Most of the damage to this boat has been from hurricans. She has been at Dinner Key for 16 years and servived Andrew and many others.
PS: Anyone with suggestions of a hauler? The quote I got from the guy I have used for years is up 2K from when he brought SeaYawl two years ago! Miami to Schenectady N.Y.
Wayne
- Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
Congratulations!
I am sure I speak for others when I say, "pictures, please"...any and all pictures, if you are able, would be great once she arrives in your neck of the woods. Trucking pictures are always fun, too.
2K is a lot to go up in a couple years, but with the price of fuel and other factors, a healthy increase seems justified, if not necessarily agreeable. It's a bitter pill to swallow, though. Ouch.
I am sure I speak for others when I say, "pictures, please"...any and all pictures, if you are able, would be great once she arrives in your neck of the woods. Trucking pictures are always fun, too.
2K is a lot to go up in a couple years, but with the price of fuel and other factors, a healthy increase seems justified, if not necessarily agreeable. It's a bitter pill to swallow, though. Ouch.
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
WOW, that's very exciting! Congratulations. A pushpit you say?....
[img][img]http://img.photobucket.com/albums/v316/ ... y16002.jpg[/img][/img]
Best of luck with her. We really look forward to you sharing your progress.
Nanette
[img][img]http://img.photobucket.com/albums/v316/ ... y16002.jpg[/img][/img]
Best of luck with her. We really look forward to you sharing your progress.
Nanette
-
- Bottom Paint Application Technician
- Posts: 16
- Joined: Thu Feb 10, 2005 12:33 pm
- Location: Schenectady N.Y. / East Boothbay Maine
Nanette,
Thank you so much! I will send pictures when she arrives.
Right now trying to get her out of Miami before storm season. As said above real work will begin next year (retirement year). This year will be to develop a list of all required work for restoration. Keeping my Bounty II project moving is the priority.
Thank you so much! I will send pictures when she arrives.
Right now trying to get her out of Miami before storm season. As said above real work will begin next year (retirement year). This year will be to develop a list of all required work for restoration. Keeping my Bounty II project moving is the priority.
Wayne
-
- Bottom Paint Application Technician
- Posts: 16
- Joined: Thu Feb 10, 2005 12:33 pm
- Location: Schenectady N.Y. / East Boothbay Maine
Tim,
You probably don?t remember, but you and I e-mailed a few times when I purchased the Bounty II. The story goes that in the sixties I was building Rhodes 27s at Lund boat works in Erie Pa. A customer we did lots of work for arrived with a new Bounty II. It was the first large fiberglass sailboat I had ever seen. I sailed with them that summer and 40 years later found the boat and bought it ?Sea Yawl?. When finished it will be on a mooring at Ocean Point East Boothbay my family?s home.
Because I have a large shop ?barn? in Schenectady and spend all my free time in my shop and will be retired next year I wanted a continuing project ( Invicta).
You probably don?t remember, but you and I e-mailed a few times when I purchased the Bounty II. The story goes that in the sixties I was building Rhodes 27s at Lund boat works in Erie Pa. A customer we did lots of work for arrived with a new Bounty II. It was the first large fiberglass sailboat I had ever seen. I sailed with them that summer and 40 years later found the boat and bought it ?Sea Yawl?. When finished it will be on a mooring at Ocean Point East Boothbay my family?s home.
Because I have a large shop ?barn? in Schenectady and spend all my free time in my shop and will be retired next year I wanted a continuing project ( Invicta).
Wayne