Silly little trick, but I found when cutting some replacement balsa core for a recent repair, once the pattern was marked out, an easy way to make the cuts to put the core to be cut on an empty pizza box and cut it with a multimaster (or knockoff). The core material remained nicely supported, and the blade could slice right through the cardboard into nothing but air.
With enough cuts, the box gives out of course, but for my purposes, and for trimming aboard, this was a helpful trick. Maybe it'll be of use to someone else.
Cutting replacement balsa core
Re: Cutting replacement balsa core
Sounds like your re-core is coming along: )
Thanks for the tip.
Thanks for the tip.
-
- Deck Grunge Scrubber
- Posts: 40
- Joined: Thu Jul 22, 2010 9:19 pm
- Boat Name: Windrift
- Boat Type: Seafarer (Rhodes) Meridian
Re: Cutting replacement balsa core
Thanks, Rachel. I'm, um, unburdened with experience in this area, but this worked well.
Yes the recore is comng along fine. I'll post an update in the other thread. Thanks for asking!
Yes the recore is comng along fine. I'll post an update in the other thread. Thanks for asking!
-
- Boat Obsession Medal Finalist
- Posts: 684
- Joined: Wed Jan 25, 2006 6:28 pm
- Location: Beaufort, North Carolina
- Contact:
Re: Cutting replacement balsa core
A sharp fillet knife is what I use. Balsa shears easily, and the knife works well for cutting the scrim backing too.
1961 Pearson Triton
http://pylasteki.blogspot.com/
1942 Coast Guard Cutter - Rebuild
http://83footernoel.blogspot.com/
http://pylasteki.blogspot.com/
1942 Coast Guard Cutter - Rebuild
http://83footernoel.blogspot.com/
-
- Master of the Arcane
- Posts: 1317
- Joined: Thu Dec 28, 2006 8:50 am
- Boat Name: Hirilondë
- Boat Type: 1967 Pearson Renegade
- Location: Charlestown, RI
Re: Cutting replacement balsa core
Yup, a serrated bread kn\ife works well too.Zach wrote:A sharp fillet knife is what I use. Balsa shears easily, and the knife works well for cutting the scrim backing too.
Dave Finnegan
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
-
- Deck Grunge Scrubber
- Posts: 40
- Joined: Thu Jul 22, 2010 9:19 pm
- Boat Name: Windrift
- Boat Type: Seafarer (Rhodes) Meridian
Re: Cutting replacement balsa core
If only I'd asked in advance! . . .. I figured I needed a saw and what a mess a hand saw made. Perhaps a knife would have worked as well or better, but I must say that the pizza box/Multimaster solution was quick, precise, and handy.
-
- Master of the Arcane
- Posts: 1317
- Joined: Thu Dec 28, 2006 8:50 am
- Boat Name: Hirilondë
- Boat Type: 1967 Pearson Renegade
- Location: Charlestown, RI
Re: Cutting replacement balsa core
If you don't try new things and "bright" ideas yourself you will never know. There is just so much you can learn form others, and some things you just have to learn the hard way. I find I have to learn many things the hard way ;>)
Dave Finnegan
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.