Here are the ends of my jib sheets. Can anyone tell me how to repair this?
Could use some jib sheet advice.
- pjesus
- Rough Carpentry Apprentice
- Posts: 71
- Joined: Thu Nov 05, 2009 1:37 pm
- Boat Name: Jet Lag
- Boat Type: 1982 B-Jet
- Location: Portugal
Re: Could use some jib sheet advice.
I think there's not much to repair there.
I would do the following...
Apparently there's some 'play' between the core and the cover (that's why you have the core standing out).
Starting from one end of the jib sheet, "milk"(*) the rope all the way towards the other end. Do it a couple of times. This will "align" core and cover.
Cut both ends in the point the cover and core last meet (so you don't have extra core nor cover).
Burn the ends.
Whip the ends and lock stitch them (if you have trouble with this I'll try to find out a video or PDF that shows how to do it)
Go sailing :)
15 minutes work. Just did it last night on my new boomjack rope.
(*)If you're not familiar with the concept of "milking" a rope here's how you do it: https://www.youtube.com/watch?v=JpEDCHu9rnA
(you can do without the yellow rope apparatus and just use your hands - use gloves, it gets hot)
I would do the following...
Apparently there's some 'play' between the core and the cover (that's why you have the core standing out).
Starting from one end of the jib sheet, "milk"(*) the rope all the way towards the other end. Do it a couple of times. This will "align" core and cover.
Cut both ends in the point the cover and core last meet (so you don't have extra core nor cover).
Burn the ends.
Whip the ends and lock stitch them (if you have trouble with this I'll try to find out a video or PDF that shows how to do it)
Go sailing :)
15 minutes work. Just did it last night on my new boomjack rope.
(*)If you're not familiar with the concept of "milking" a rope here's how you do it: https://www.youtube.com/watch?v=JpEDCHu9rnA
(you can do without the yellow rope apparatus and just use your hands - use gloves, it gets hot)