Search found 51 matches
- Mon Jun 25, 2007 12:33 pm
- Forum: Projects
- Topic: The Sea Glass Project
- Replies: 31
- Views: 10151
- Tue Jun 19, 2007 12:37 pm
- Forum: Questions and Answers
- Topic: Rebuilding Interior
- Replies: 23
- Views: 3214
Great Photos in Both
The photos raise a question. You didn't leave a space between each strip. I had always thought there needed to be one to accomdate the inevitable swelling and shrinking of the wood.
- Fri May 18, 2007 5:15 pm
- Forum: Questions and Answers
- Topic: Transporting Mast
- Replies: 16
- Views: 2042
I definately would like to see the photo of 2X4s under the hood!!! I live in VA just outside Washington DC. A number of years ago, I used to paint houses in the summers, I was a teacher. Well I was working on a 3 1/2 story townhouse in Alexandria and needed a long ladder, I had to rent it, Ican't re...
- Fri May 18, 2007 11:27 am
- Forum: Questions and Answers
- Topic: Topsides
- Replies: 41
- Views: 8423
Well, after I having eaten my fill of Bavarian Kreme Philled Krispee Cream Doeknuts, I thought I'd reply. Thanks for the advice about 5200, I'll install the coamings without any Calk initially and if the water seepage is a problem I can always go back and addit. As always, the wealth of information ...
- Thu May 17, 2007 7:00 pm
- Forum: Questions and Answers
- Topic: Transporting Mast
- Replies: 16
- Views: 2042
- Thu May 17, 2007 4:40 pm
- Forum: Questions and Answers
- Topic: Transporting Mast
- Replies: 16
- Views: 2042
Transporting Mast
I need to take my mast to have a repair made. When I took it off I owned a small pickup with a substanial ladder rack on it and even though the mast overhung both ends it was stable. Now I have an Exporer or Volvo wagon. Does anyone have any ideas of a way I can transport the mast? I can borrow a fu...
- Thu May 17, 2007 9:52 am
- Forum: Questions and Answers
- Topic: Topsides
- Replies: 41
- Views: 8423
Thanks
Thanks for all the information. I had intended to countersink and plug the screws but now I am rethinking this. Originally I would have used 5200 permanent caulk/adhesive but with a removable installation wondering if one caulk would be superior to another in this application.
Thanks again.
Thanks again.
- Tue May 15, 2007 8:36 pm
- Forum: Questions and Answers
- Topic: Topsides
- Replies: 41
- Views: 8423
Cockpit Coaming, etc
Tim, I went to Glissando's site and read through your recent work. I was struck by the fact that you removed the cockpit coaming. I am going to be replacing the coaming on my Kittiwake, have the teak already, and was considering the best way to install it, how many screws, etc. Initially, I consider...
- Sat Feb 17, 2007 9:10 pm
- Forum: Projects
- Topic: Albin Vega Project
- Replies: 51
- Views: 15808
Flap Disks
I can't see the pictures, but I'll take Rachel's word that it has a nice even bevel. Now, I've never seen flap disks before. Are they readily available? Or, do you have to order them?
Thanks
Thanks
- Sat Dec 16, 2006 6:37 pm
- Forum: Questions and Answers
- Topic: Bronze Rubstrake for teak coaming
- Replies: 12
- Views: 1425
Wife's Sense of Humor
I like our wife's sense of humor. OH, maybe she really meant "nice tiller".
- Thu Dec 14, 2006 12:56 pm
- Forum: Projects
- Topic: Albin Vega Project
- Replies: 51
- Views: 15808
What Did You Use?
What did you use to get such a nice consistant bevel around the hole?
- Thu Dec 07, 2006 12:00 pm
- Forum: Questions and Answers
- Topic: Epoxy Still Tacky
- Replies: 10
- Views: 1257
I must be a bad batch, I did remember to use one pump of epoxy and one of hardener. I will check the pumps because they might be not functioning properly. Oh well at least it wasn't a big batch. The week before I had mixed up a big batch with thickener in it and did some more work on the deck, that ...
- Thu Dec 07, 2006 11:56 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Possible material for cabin ceilings...
- Replies: 13
- Views: 2784
Used that Material Before
Tim, Used that material, I've always referred to it as "beaded proch ceiling" because it duplicates the tongue and groove fir that was often used on porch cielings. It would take a good bit of prep to get a nice finish like that. I actually have a few small pieces of that left from when I ...
- Wed Dec 06, 2006 3:40 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Possible material for cabin ceilings...
- Replies: 13
- Views: 2784
Wood vs ?
If and when I ever get to the point of installing ceiling and overhead I would lean toward wood. My boat doesn't have a liner at all, so I'd figure on epoxying some stringers or battens along the hull to attach the ceiling and then do the same with overhead. I have some really nice ash boards left o...
- Wed Dec 06, 2006 3:31 pm
- Forum: Questions and Answers
- Topic: Epoxy Still Tacky
- Replies: 10
- Views: 1257
Epoxy Still Tacky
About 3 weeks ago, I mixed up some epoxy to coat the deck core where my new scuppers will go. I am using the West System pumps. It was just over 60 degrees, but it was kind of late in the day so it didn't stay 60 for long. Since then we have had days that are well over 60. The thing is my epoxy is s...
- Wed Oct 11, 2006 9:22 am
- Forum: Projects
- Topic: Awlgrip of C&C 40 "Delphinus"
- Replies: 97
- Views: 24555
- Tue Sep 26, 2006 9:09 am
- Forum: Questions and Answers
- Topic: Relocating Cockpit Drain Through Hulls
- Replies: 11
- Views: 1622
Tim, you make a good point. However, if the point where the hose connection on the seacock and through hull ended up being higher than the connection at the scupper it wouldn't drain at all, until water in the cockpit got higher, but then there would always be some residue of water in the cockpit. S...
- Mon Sep 25, 2006 7:28 pm
- Forum: Questions and Answers
- Topic: Relocating Cockpit Drain Through Hulls
- Replies: 11
- Views: 1622
Thanks
I was pretty sure that was the case, about locating them below the water line but wanted make certain. There is always someone on this board that can provide solid answers, usually more than 1, as in this case. I don't have to cross the lines as the scuppers I have have a ball in them that acts as a...
- Mon Sep 25, 2006 10:54 am
- Forum: Questions and Answers
- Topic: Relocating Cockpit Drain Through Hulls
- Replies: 11
- Views: 1622
Relocating Cockpit Drain Through Hulls
Yesterday, I was about to install my new through hulls, seacocks, and cockpit scuppers. Previously the boat had molded in nipples as the drain for the cockpit and for the hull opening, no seackok or fitting at all. Anyway, as I started assembling the pieces to test fit everything I realized that wit...
- Thu Sep 21, 2006 11:18 am
- Forum: Questions and Answers
- Topic: Report from the Newport boat show, we almost bought a boat
- Replies: 29
- Views: 5895
Sailed a Similar Boat
I chartered a boat with a similar layout in the BVI this past May. The holding tank for the head was under the starboard settee, the water tank under the forward v berth. That left the port settee for storage, which wasn't much. Overall, there was very little storage on the boat I was on. I'm not su...
- Wed Aug 30, 2006 2:58 pm
- Forum: Questions and Answers
- Topic: What-to-bring list for a first cruise
- Replies: 21
- Views: 2569
Are you kidding? Actually, I was thinking of the cruising I did with up to 13 other people on a 30 foot boat but telling that story would be a blatant hijack of this thread, which as you all know I never do. Last year's three month cruise was my version of excessive consumption. -Britton Acutally, y...
- Fri Aug 25, 2006 3:12 pm
- Forum: Projects
- Topic: Miranda's Big Day... or the Accidental Sailor
- Replies: 5
- Views: 1249
What Great Work
Your Boat looks fabulous. I am so impressed on the one hand and so jealous on the other, not sure mine will ever look that good. You have done a magnificent job!
- Wed Aug 09, 2006 1:24 pm
- Forum: Questions and Answers
- Topic: Newbie to Epoxy
- Replies: 28
- Views: 6305
Mixing Pots
I have several metal paint pots and use them to mix epoxy. I have the pumps to dispense the epoxy and hardener. Since these pots are a little bigger and provide a broader surface I find the epoxy doesn't kick as quickly as n smaller containers. When finished I just pour some acetone into the pot and...
- Wed Aug 09, 2006 11:16 am
- Forum: Projects
- Topic: My Kittiwake 23
- Replies: 2
- Views: 1008
Holy Cow
I checked this last night before I posted it and the pictures showed up. Then after I posted it I checked again and the pictures showed, now this morning I can't see the pictures.
Somethin' mighty mysterious is goin' on 'round here!
Somethin' mighty mysterious is goin' on 'round here!
- Tue Aug 08, 2006 10:16 pm
- Forum: Projects
- Topic: My Kittiwake 23
- Replies: 2
- Views: 1008
- Tue Aug 08, 2006 10:14 pm
- Forum: Projects
- Topic: My Kittiwake 23
- Replies: 2
- Views: 1008
My Kittiwake 23
I'm hoping this works, this is a new process for me. I started the deck recore quite some time ago. Here are a few picks of the forward and side deck after the plywood has been laid. http://img3.freeimagehosting.net/uploads/th.39f0e29469.jpg http://img3.freeimagehosting.net/uploads/th.775a786fc1.jpg...
- Mon Jul 31, 2006 7:27 pm
- Forum: Materials, Sources, and Innovations
- Topic: Cockpit Scuppers and Nonskid Teak Finish
- Replies: 9
- Views: 2174
- Mon Jul 31, 2006 5:04 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Basic Grinding Technique
- Replies: 8
- Views: 1571
- Mon Jul 31, 2006 4:59 pm
- Forum: Materials, Sources, and Innovations
- Topic: Cockpit Scuppers and Nonskid Teak Finish
- Replies: 9
- Views: 2174
Cockpit Scuppers and Nonskid Teak Finish
I want to install cockpit scuppers on my Kittiwake. It currently has holes that are abour 3/4 ID. with molded in nipple drain into the hull that is 3/4 also. I want to install them right with through hull fittings and seacocks. The cockpit is average size for a 23' boat so, I'm not sure 3/4" dr...
- Fri Jul 21, 2006 10:18 am
- Forum: Questions and Answers
- Topic: Sizing Backing Plates
- Replies: 10
- Views: 967
Guys, I am a retired high school history teacher and all this is way over my head. I'm not sure I am qualified to ask questions on this board!!!!! Seriously, thanks for all the responses. I will make the backing plate a couple of times bigger than the hardware being attached, space permitting. After...
- Thu Jul 20, 2006 1:39 pm
- Forum: Questions and Answers
- Topic: Sizing Backing Plates
- Replies: 10
- Views: 967
- Thu Jul 20, 2006 10:27 am
- Forum: Questions and Answers
- Topic: Sizing Backing Plates
- Replies: 10
- Views: 967
Sizing Backing Plates
Is there any rule of thumb about how big a backing plate should be? Obviously at least as big as whatever it is backing up, but should it be 1/2 again as big, a little bit bigger, a lot bigger?
Any other advice is welcome?
Any other advice is welcome?
- Mon Jul 17, 2006 2:54 pm
- Forum: Questions and Answers
- Topic: Applying Fiberglass
- Replies: 18
- Views: 2801
Thanks for all the advice. Indeed trying to apply it over head does result in it falling on one's head!!!!! NOT a pretty sight. Anyway, I left on Saturday pretty depressed. After thinking it over the only thing I didn't try was putting thickened epoxy on the exisitng layer. So went back down on Sund...
- Sun Jul 16, 2006 10:44 am
- Forum: Questions and Answers
- Topic: Applying Fiberglass
- Replies: 18
- Views: 2801
Tim, I was able to get the first layer of cloth to adhere. I had applied thickened epoxy and that was ok. It was the next layer that would not stick to the first one. Wondering if I should have wetted out the first layer while it was on. I guess the next question is, will I get as much structural in...
- Sat Jul 15, 2006 2:47 pm
- Forum: Questions and Answers
- Topic: Applying Fiberglass
- Replies: 18
- Views: 2801
Problem
I decided to glass over the outboard well and use an outboard bracket. So, last week, I removed the lazerette sole, the outboard well surround, etc. I ground everything down on the inside and the outside, hopefully tapering it properly. Today, I was going to apply the fiberglass. I put a piece of fi...
- Mon Jul 03, 2006 9:57 am
- Forum: Questions and Answers
- Topic: belowdecks gasoline tank for an outboard motor
- Replies: 11
- Views: 1468
For What It's Worth
At a Coast Guard Auxiliary meeting a while back someone mentioned that ethanol gas will eat up plastic/synthetic gas tanks. Supposedly a report had been issued somewhere. I don't know this for certain but the guy that provided the information is usually pretty knowledgable.
- Sun Jun 25, 2006 4:29 pm
- Forum: Questions and Answers
- Topic: Applying Fiberglass
- Replies: 18
- Views: 2801
Fairing
Yes, the existing skin is about 3/16. I guess I can go ahead and fair that amount. It will seem like an awful of epoxy. But like you said it will be worth it to have the deck fair. It seems to me that I will have to make some sort of screed, like used to level concrete. But make it consistent with t...
- Sat Jun 24, 2006 5:56 pm
- Forum: Questions and Answers
- Topic: Applying Fiberglass
- Replies: 18
- Views: 2801
I went down today and started grinding the edges so as to hopefully lay the fiberglass tomorrow. I hadn't noticed this before but I find that the existing deck is not true, there is a difference in several places. The plywood I installed is flush with the old deck and some places it sits just below ...
- Sat Jun 24, 2006 5:35 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Building a Hatch
- Replies: 16
- Views: 3028
- Tue Jun 20, 2006 8:26 am
- Forum: Projects
- Topic: Fiberglass Repair Recore of Mast Step
- Replies: 2
- Views: 773
Appreciate Reply
Tim, Thanks for the reply. I figured that I could grind out the area and redo it. Now I have the confidence to go ahead and start on the deck. My next big delimma is that there is a lazerette in the aft section with hatches, it includes a well for the outboard. I found last week that the plywood dec...
- Mon Jun 19, 2006 9:56 pm
- Forum: Projects
- Topic: Fiberglass Repair Recore of Mast Step
- Replies: 2
- Views: 773
Fiberglass Repair Recore of Mast Step
Below are a couple of pictres showing my effort at fiberglassing the area where the mast step is. I had started right under the step and the rotted core material just continued. You can see a bubble right about inthe middle near the upper edge. I thought I had worked all the air out, stopped for lun...
- Wed Jun 14, 2006 11:15 am
- Forum: Questions and Answers
- Topic: Applying Fiberglass
- Replies: 18
- Views: 2801
Many Thanks
Thank you all for your wealth of knowledge and advice. Honestly, I feel a lot more confident now than after reading the West System booklet several times. I guess hearing it from people who have actually done the same type of work helps. Plus your explanations are so clear and easy to follow. I work...
- Tue Jun 13, 2006 10:50 am
- Forum: Questions and Answers
- Topic: Applying Fiberglass
- Replies: 18
- Views: 2801
Applying Fiberglass
Well here goes again. I plan to cover the recored deck this coming weekend. I got some biaxial cloth from Jamestown Distributors. I have reglassed some small areas already and have read and reread the West System booklet. However, I have some trepidation. Let see if I have this process correct. West...
- Mon Jun 12, 2006 11:29 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Building a Hatch
- Replies: 16
- Views: 3028
Beautiful Hatch
Thanks for the information and especially the drawing that even I could figure out. And... the beautiful pictures, man what a gorgeous boat!!!!! I may fiddle around with that, with some common lumber and see what happens. If I can make it work then I'd go ahead and make it out of teak or mahogany. M...
- Fri Jun 09, 2006 3:36 pm
- Forum: Boatbuilding and Repair Techniques
- Topic: Building a Hatch
- Replies: 16
- Views: 3028
Great Help
Thanks! That makes more sense now. But...one more question. So you have a channel for the water, but where does it go? Would you leave the low end open or drill weep holes (that's what they'd be called in construciton, maybe limber holes in a boat application)? I have to/want to replace my hatch, in...
- Fri Jun 09, 2006 10:24 am
- Forum: Boatbuilding and Repair Techniques
- Topic: Building a Hatch
- Replies: 16
- Views: 3028
Building a Hatch
Below is a link to an article about building a hatch. I read it several times and can't quite grasp how this works. (Admittedly I am LD!) I'm sure others here can figure this out and hopefully illuminate me.
http://216.70.54.78/newspics/charts/856 ... atches.pdf
[/url]
http://216.70.54.78/newspics/charts/856 ... atches.pdf
[/url]
- Thu Jun 01, 2006 12:35 pm
- Forum: Tools and Techniques
- Topic: Bosch 6" sander
- Replies: 11
- Views: 2944
PC Sander
I just went to the Porter Cable website, they did not show the 7334, but have the 7335 and 7336. So I called the PC 888 number. The 7334 has been discontinued but the 7335 and 7336 have the same moter, etc. Then went to the Lowes website. They have the 7335 for $105. Seems like a pretty good deal.
- Tue May 30, 2006 9:00 pm
- Forum: Tools and Techniques
- Topic: Porter Cable RO Sander
- Replies: 15
- Views: 3810
Sander/Grinder
I just read Tim's tool page today. He heartily endorses the Porter Cable 7334. There is also a thread discussing air powered sanders/tools. I have a compressor, from my building days, and am now wondering which would be better, an air powered sander/grinder or the Porter Cable. I'd be glad to hear o...
- Thu May 25, 2006 11:00 am
- Forum: Questions and Answers
- Topic: Biax with or without mat?
- Replies: 14
- Views: 2027
Great Advice
Tim, Thanks for taking time to give such a thorough explanation. I've done a little bit of fibergalss work but not very knowledgable. I will follow your advice. I'm hoping to get a good bit of the work done this weekend, unless of course my wife comes up with something critical at home!!!!! Thanks s...
- Wed May 24, 2006 2:35 pm
- Forum: Questions and Answers
- Topic: Biax with or without mat?
- Replies: 14
- Views: 2027
What material to use?
I have installed new marine plywood coring material to most of the deck on my Kittiwake 23. I now have to recover it. I had assumed that I'd just use fiberglass cloth, something liek 7 oz. Recently I read somewhere else that fiberglass cloth shouldn't be use, but mat should instead. I'd apprecaite a...