Sourcing BedIt butyl tape

Talk about favorite or hated suppliers, recommend good materials or sources, or anything of the same ilk. This is also a good place to suggest unique ideas and innovations you may have come up with.
Post Reply
lsheaf
Master Varnisher
Posts: 112
Joined: Tue Sep 10, 2019 8:41 pm
Boat Name: Stardust
Boat Type: Allied Seawind 30

Sourcing BedIt butyl tape

Post by lsheaf »

Does anyone know where I can find some BedIt butyl tape? Everywhere I check, it says it is back ordered. Are there any alternatives?

The stuff I’ve bought from defender isn’t as sticky and doesn’t last.
User avatar
atomvoyager
Moderator | Revitalizer of Classics
Posts: 423
Joined: Thu Jul 12, 2018 7:48 am
Boat Name: Atom
Boat Type: Pearson Triton
Contact:

Re: Sourcing BedIt butyl tape

Post by atomvoyager »

I noticed Bed-it butyl had been out of stock everywhere for about a year but apparently is now available again from Hamilton Marine:
https://shop.hamiltonmarine.com/product ... -4482.html

This Dicor brand on Amazon is cheaper and might be OK but I haven't tried it yet. It has mostly good reviews but a few said it was stuck to the plastic and difficult to use:
https://www.amazon.com/Dicor-BT-1834-1- ... ref=sr_1_3

You might try some local butyl at a hardware store.
User avatar
atomvoyager
Moderator | Revitalizer of Classics
Posts: 423
Joined: Thu Jul 12, 2018 7:48 am
Boat Name: Atom
Boat Type: Pearson Triton
Contact:

Re: Sourcing BedIt butyl tape

Post by atomvoyager »

Also, Sail-rite sells their version of butyl. I found it useable but a bit less sticky than Bed-it although it sticks to the backing paper too well.
https://sca.sailrite.com/Trimmable-Butyl-Tape-3-4
lsheaf
Master Varnisher
Posts: 112
Joined: Tue Sep 10, 2019 8:41 pm
Boat Name: Stardust
Boat Type: Allied Seawind 30

Re: Sourcing BedIt butyl tape

Post by lsheaf »

Thanks Atom,

I did order some off Amazon a while back and it melted in the mail. It was a great big mess but I put it in the refrigerator and was able to use certain pieces. It’s been so long ago I’m not sure what brand it was.

I’ll grab a roll or two from Hamilton while they’re in stock.

Logan
Post Reply