Here's the latest. I added inverted triangular windows to the top panel. These windows will be located on the side of the dodger in the span between the forward and aft bows. The pictures are a sort of step-by-step of the process.David VanDenburgh wrote:A surprisingly short list - for once. There will, I'm sure, be a number of smaller projects to complete in the spring before we set off on a month-long cruise during July.
- Finish constructing/sewing dodger
Construct new drifter
Install Dickinson solid fuel heater
The dodger frame
David
I've finally resumed work on the dodger. I've cut all of the panels except for the side curtains, and I'm in the process of finishing the windows. It's amazing just how much time this kind of work takes. Once the windows are in and trimmed, I can begin assembling the panels. It will be cool to see this thing take shape.
Here are a few photos of the window measurements and installation.
Since this is my first time with something like this, there's a lot of "intelligent" guesswork involved. I suppose those who've done it a few times are far more confident that it will fit snugly and have all the right parts in all the right places. My biggest concern at this point is whether or not the bottoms of the side windows will be parallel to the cabin. I'm keeping my fingers crossed.
David
Window measurements with Strataglass cut to size and ready to be sewn on the back side of the panel.
Laying down the outer stitches to secure Strataglass.
Outer stitches in place.
Fabric removed to expose window.
Trimming and rolling edges and corners.
Corners and edges rolled for final row of stitches along inner edge.
Laying down the inner stitches.
One done, one to go.
Inner and outer edges of completed windows.
I'm nearing final panel assembly. I have a few more materials on order from Sailrite, so once those arrive I'll be able to trim out the inside edges of the windows, add reinforcement along the aft edge of the top panel, and sew the panels together. I'm anxious to see it come together.
David