Strong but paint safe solvent or cleaners?
- Bluenose
- Candidate for Boat-Obsession Medal
- Posts: 438
- Joined: Thu Apr 05, 2007 4:19 pm
- Boat Name: Bolero
- Boat Type: Modified Shields One Design
- Location: Lopez Island, WA
- Contact:
Strong but paint safe solvent or cleaners?
Despite my attempts to setup my mooring in a way that prevents the crappy (but require) plastic mooring ball away from Bolero, I managed to get a few mooring rubs on her blue topside paint. These scuffs appear to be mostly on the exterior of the paint and and I can flake pieces of the white plastic off with my fingernail.
So does anyone have some advice on progress cleaning strategies that protects the paint?
Thanks,
Bill
So does anyone have some advice on progress cleaning strategies that protects the paint?
Thanks,
Bill
-
- Master of the Arcane
- Posts: 1317
- Joined: Thu Dec 28, 2006 8:50 am
- Boat Name: Hirilondë
- Boat Type: 1967 Pearson Renegade
- Location: Charlestown, RI
Re: Strong but paint safe solvent or cleaners?
Hmmm, seems that a solvent won't help at all. Have you tried buffing the scuff out? Maybe use something like Finesse-It
Dave Finnegan
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
- Chris Campbell
- Candidate for Boat-Obsession Medal
- Posts: 422
- Joined: Tue Jun 06, 2006 9:18 am
- Boat Name: Luna
- Boat Type: Yankee 30
- Location: Chester, NS
- Contact:
Re: Strong but paint safe solvent or cleaners?
Weatherbird used to get white streaks from the fenders lining the side of the club tender - I would just rub them off with my fingers. The friction of my finger against the streak of rubber (or plastic) would take it off eventually. And build callous on my finger, incidentally.
Not sure if your situation is the same - but if so, it is more or less guaranteed to not damage the paint, at least!
Not sure if your situation is the same - but if so, it is more or less guaranteed to not damage the paint, at least!
- Peter
- Boat Obsession Medal Finalist
- Posts: 580
- Joined: Mon Nov 15, 2004 11:23 pm
- Boat Name: Pagan
- Boat Type: Albin Ballad 30
- Location: Pedder Bay (Victoria), BC, Canada
- Contact:
Re: Strong but paint safe solvent or cleaners?
Bill, I've had good luck with Mr. Clean Magic Erasers on my docking scuffs, as long as the scuff mark is an "addition", not a "subtraction"!
-
- Candidate for Boat-Obsession Medal
- Posts: 349
- Joined: Mon Jun 11, 2007 9:31 pm
- Boat Name: Paper Moon
- Boat Type: Luders 33 (Allied Boat Co.)
- Location: Mystic CT
Re: Strong but paint safe solvent or cleaners?
I am in idiot! I have been using Magic Erasers around the house for years and I love them. Prior to Peter's post, I have never considered their use on a boat. That will change tomorrow. TRY MAGIC ERASERS!
Cheers
Dennis
Luders 33 "Paper Moon" Hull No 16
Life is too short to own an ugly boat.
Dennis
Luders 33 "Paper Moon" Hull No 16
Life is too short to own an ugly boat.
-
- Skilled Systems Installer
- Posts: 178
- Joined: Thu Apr 17, 2003 4:27 pm
- Boat Name: Scoot
- Boat Type: Shark 24
- Location: Burlington, Ontario
- Contact:
Re: Strong but paint safe solvent or cleaners?
Magic Erasers are great around the boat. I've found them especially good for removing black mold from gelcoat.
Just be careful. I've used them on my hull to remove scuff marks etc. but have noted that the area in which I used them looks more white than the surrounding area. I don't know if this is because I have just removed more wax or grime in that area OR the magic eraser has some sort of "bleaching" agent in it. On my slightly "off-white" gelcoat, magic eraser use can lead to a slightly blotchy appearance. Remember also that they are abrasive. Use them with care.
Just be careful. I've used them on my hull to remove scuff marks etc. but have noted that the area in which I used them looks more white than the surrounding area. I don't know if this is because I have just removed more wax or grime in that area OR the magic eraser has some sort of "bleaching" agent in it. On my slightly "off-white" gelcoat, magic eraser use can lead to a slightly blotchy appearance. Remember also that they are abrasive. Use them with care.
-
- Master of the Arcane
- Posts: 1317
- Joined: Thu Dec 28, 2006 8:50 am
- Boat Name: Hirilondë
- Boat Type: 1967 Pearson Renegade
- Location: Charlestown, RI
Re: Strong but paint safe solvent or cleaners?
Magic erasers are an abrasive, which is why they work well for cleaning. I don't know, but they may be more abrasive than desired on a nice shiny LPU paint job.
Dave Finnegan
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
builder of Spindrift 9N #521 'Wingë'
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Gresham’s Law of information: Bad information drives out good. No matter how long ago a correction for a particular error may have appeared in print or online, it never seems to catch up with the ever-widening distribution of the error.
- Bluenose
- Candidate for Boat-Obsession Medal
- Posts: 438
- Joined: Thu Apr 05, 2007 4:19 pm
- Boat Name: Bolero
- Boat Type: Modified Shields One Design
- Location: Lopez Island, WA
- Contact:
Re: Strong but paint safe solvent or cleaners?
Thanks for all the suggestions. I did pick up a box of Magic Erasers but I will work my towards using them and only after trying in the least noticeable place first.
Scratches, dings and scuffs are a frustrating part of using Tim's beautiful paint job but I guess the only option is keeping Bolero on its trailer in a glass case (I think I remember Tim offering me that service).
I will post results if I obtain any.
Cheers,
Bill
Scratches, dings and scuffs are a frustrating part of using Tim's beautiful paint job but I guess the only option is keeping Bolero on its trailer in a glass case (I think I remember Tim offering me that service).
I will post results if I obtain any.
Cheers,
Bill
-
- Boat Obsession Medal Finalist
- Posts: 741
- Joined: Fri Mar 18, 2005 10:41 pm
- Boat Name: Rambunctious
- Boat Type: J/30
- Location: Mandeville, LA
- Contact:
Re: Strong but paint safe solvent or cleaners?
If you really think it needs a solvent to get cleaned, I would use the same solvent that the LPU manufacturer recommends using to clean the surface prior to painting. Of course, test on an inconspicuous area first.
- Bluenose
- Candidate for Boat-Obsession Medal
- Posts: 438
- Joined: Thu Apr 05, 2007 4:19 pm
- Boat Name: Bolero
- Boat Type: Modified Shields One Design
- Location: Lopez Island, WA
- Contact:
Re: Strong but paint safe solvent or cleaners?
Thanks again for all the replies. Today I was varnishing and had a couple of runs from my toe-rail. I quickly grabbed rag with a small bit of brushing thinner and wiped them up. Just for the heck of it a tried a light rub on these scuffs. They came off with ease.
I couldn't see any effect on the paint in the small area that I tested or the area where I cleaned up the varnish.
I couldn't see any effect on the paint in the small area that I tested or the area where I cleaned up the varnish.
- Tim
- Shipwright Extraordinaire
- Posts: 5708
- Joined: Tue Apr 01, 2003 6:39 pm
- Boat Name: Glissando
- Boat Type: Pearson Triton
- Location: Whitefield, ME
- Contact:
Re: Strong but paint safe solvent or cleaners?
LPU is immune to paint thinner or related solvents. Even acetone is fine, used with care.
---------------------------------------------------
Forum Founder--No Longer Participating
Forum Founder--No Longer Participating
- Bluenose
- Candidate for Boat-Obsession Medal
- Posts: 438
- Joined: Thu Apr 05, 2007 4:19 pm
- Boat Name: Bolero
- Boat Type: Modified Shields One Design
- Location: Lopez Island, WA
- Contact:
Re: Strong but paint safe solvent or cleaners?
Tim, good to know.Tim wrote:LPU is immune to paint thinner or related solvents. Even acetone is fine, used with care.
And all of this.
Is now gone like it was never there.
Bill