Engine panel lexan cover
-
- Deck Grunge Scrubber
- Posts: 46
- Joined: Thu Jul 05, 2007 8:13 am
- Boat Name: Ring
- Boat Type: Pearson Triton 559
- Location: Pembroke Mass.
- Contact:
Engine panel lexan cover
Anybody have any idea of a company or a person who would make up a Lexan cover for my engine panel in the cockpit. Does not have to be water tight just for protecting the ignition and blower switch. I did find a company that sells panel visors for Yanmar engine panels but will not fit my panel, great looking though! Any help would be appreciated.
-
- Bottom Sanding Grunt
- Posts: 3
- Joined: Fri Mar 04, 2011 12:26 am
- Boat Name: Rayna
- Boat Type: Alberg30
Re: Engine panel lexan cover
http://www.altecplastics.com/
In Boston, they can make make it with a faxed drawing, cardboard/paper template, etc... Give them a call and tell them what you need. They also have a large scrap pile if you want to make your own.
In Boston, they can make make it with a faxed drawing, cardboard/paper template, etc... Give them a call and tell them what you need. They also have a large scrap pile if you want to make your own.
-
- Master Varnisher
- Posts: 104
- Joined: Fri Jan 15, 2010 3:07 am
- Boat Name: Romper
- Boat Type: Pearson Triton hull705
- Location: Georgia
Re: Engine panel lexan cover
Will it be a flat panel type of Lexan cover? If so go to any glass shop with the dimensions and they can cut one for you. Or have a few made, they don't look very clear forever. Or try Home depot, Lowes, etc,