Alberg 30 refit

Post photos and descriptions of your ongoing projects here. No project is too big or too small.
Post Reply
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Alberg 30 refit

Post by Cruiser2B »

I am finally making some progress but also opening a can of worms. My hull is full of blisters.....
Here is what I uncovered:
http://svsalacia.blogspot.com/2015/06/a ... moval.html
www.svsalacia.blogspot.com
Preparing to get underway!!
TampaBay
Candidate for Boat-Obsession Medal
Posts: 391
Joined: Wed Sep 30, 2009 3:46 pm
Boat Type: Coronado 15

Re: Alberg 30 refit

Post by TampaBay »

I took a look at the blisters. I think you are on the right path. That West System guide sets the standard.
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

Tampa,

Thank you. I printed off the west system blister guide. Gonna study up on it while is gather supplies. Boat has been on the hard for about 9 months. Hull should be quite dry but going to let it sit without paint and covered for another month before beginning repairs. In the meantime there are about 100 other things that need attention.
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

http://svsalacia.blogspot.com/2015/06/a ... 2.html?m=0

making progress and I met a young couple cruising from CA to MA
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

Happy 4th of July everyone

Small update, scraping and sanding the paint off is just about done!

http://svsalacia.blogspot.com/2015/07/a ... -2015.html
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

small update

Looks like the bottom paint had trapped a bit of moisture in gelcoat, a few picture have been been added to my blog

http://svsalacia.blogspot.com/2015/07/a ... -hull.html
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

too hot for alot of major work, but progress

http://www.svsalacia.blogspot.com/2015/ ... ottom.html
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

http://svsalacia.blogspot.com/2015/08/a ... joint.html


found more issues with our ole Alberg 30 as I continue to dismantle her...but nothing that cannot be fixed....
www.svsalacia.blogspot.com
Preparing to get underway!!
Lloyd
Skilled Systems Installer
Posts: 187
Joined: Sun May 13, 2007 1:04 pm
Boat Name: Ella Marie
Boat Type: Bristol 27
Location: Pelahatchie. Ms

Re: Alberg 30 refit

Post by Lloyd »

I hated the taking apart process. It seemed to never end.
Lloyd
Bristol 27, #200
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

http://svsalacia.blogspot.com/2015/08/a ... nt_19.html

A few more photos of hull to deck joint that failed on my Alberg 30. Working on a plan to repair
www.svsalacia.blogspot.com
Preparing to get underway!!
David VanDenburgh
Skilled Systems Installer
Posts: 244
Joined: Sun Oct 16, 2005 8:33 pm
Boat Name: Ariel
Boat Type: Cape Dory 36
Location: St. Joseph, Michigan
Contact:

Re: Alberg 30 refit

Post by David VanDenburgh »

Lloyd wrote:I hated the taking apart process. It seemed to never end.
I've discovered that I'm an expert at ripping things apart. It's the putting them back together part that I do a bit more slowly. Ha! Best of luck!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

http://svsalacia.blogspot.com/2015/08/a ... n-and.html?

Started to formulate a plan of attack and been spending money!
www.svsalacia.blogspot.com
Preparing to get underway!!
Lloyd
Skilled Systems Installer
Posts: 187
Joined: Sun May 13, 2007 1:04 pm
Boat Name: Ella Marie
Boat Type: Bristol 27
Location: Pelahatchie. Ms

Re: Alberg 30 refit

Post by Lloyd »

Let the fun begin, or I should say let the fun continue. Getting all the hardware off can be a real pain. Looks like you have a good supply of epoxy to get the recore started. Will be following along.
Lloyd
Bristol 27, #200
TampaBay
Candidate for Boat-Obsession Medal
Posts: 391
Joined: Wed Sep 30, 2009 3:46 pm
Boat Type: Coronado 15

Re: Alberg 30 refit

Post by TampaBay »

Wow! The deck will be awesome when you're done.
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

TampaBay wrote:Wow! The deck will be awesome when you're done.
thank you, it will take lots of work and even more sandpaper and epoxy but should worth it at the end of the day
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

http://svsalacia.blogspot.com/2015/09/a ... otten.html

cut into the core today...WTF did i get myself into.......
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

Got the lazarette balsa core all cut and in place, and a few storm photos in link below

http://svsalacia.blogspot.com/2015/10/a ... oring.html
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

Progress is slow but for good reasons this month

http://www.svsalacia.blogspot.com/2015/ ... -deck.html
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

A bit more progress to report

http://www.svsalacia.blogspot.com/2015/ ... -cont.html

Happy Thanksgiving!!
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

Moved onto recoring the port side deck. The weather has been great..not sure how much longer it will hold out for outdoor boat work

http://svsalacia.blogspot.com/2015/12/a ... re-on.html
Modify message
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

More progress re-coring A30 side decks, warm weather is helping

http://svsalacia.blogspot.com/2015/12/a ... -side.html
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

Work continued over Christmas holiday as warm temperatures are still making outside boat epoxy work possible

http://svsalacia.blogspot.com/2015/12/a ... -side.html
www.svsalacia.blogspot.com
Preparing to get underway!!
CharlieJ
Wood Whisperer
Posts: 649
Joined: Fri Aug 19, 2005 7:42 pm
Location: South coast of Texas, Matagorda Bay

Re: Alberg 30 refit

Post by CharlieJ »

Wow- first new post since Dec 29 when I made mine. This place really has died. Sad thing too
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

In spite of bad weather I've managed to make a bit of progress on the Alberg

http://www.svsalacia.blogspot.com/2016/ ... epair.html
www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

www.svsalacia.blogspot.com
Preparing to get underway!!
Cruiser2B
Topside Painter
Posts: 134
Joined: Sun Jul 31, 2011 6:27 pm
Boat Name: Salacia
Boat Type: Alberg 30

Re: Alberg 30 refit

Post by Cruiser2B »

www.svsalacia.blogspot.com
Preparing to get underway!!
Lloyd
Skilled Systems Installer
Posts: 187
Joined: Sun May 13, 2007 1:04 pm
Boat Name: Ella Marie
Boat Type: Bristol 27
Location: Pelahatchie. Ms

Re: Alberg 30 refit

Post by Lloyd »

Really great job on the mast beam rework. Looks like that will hold the stick up with no sagging, no problem. Please continue to post updates. I need the encouragement of watching others work on their projects. I've been sidelined dealing with an aging Dad (94) with his hospital and rehab stays seems like for the past year. Great work!
Lloyd
Bristol 27, #200
Post Reply